Quintech Electronics SRM 200 RF Matrix Switch System
Frequency range covers IF-band (5-200 MHz), Complete RF Matrix Switching
SRM-200 RF Matrix Switch System
This product has reached end of life and has been replaced by the Quintech QRM Series
The Quintech Electronics SRM 200 is a matrix switch and switching subsystem that allows any of 16 to 256 inputs carrying RF signals to be routed to any of 16 to 256 outputs. The system utilizes patented stack-and-tier technology which offers ultra-reliable, high-performance, in a compact, modular design. This greatly reduces the size and complexity of the system while greatly enhancing the system's reliability by eliminating the need for patch panels and repetitive mechanical connections.
The system is controllable either locally via the front panel keypad or remotely via computer and is compatible with most monitoring and control systems. The rear panel design facilitates structured cable routing, thereby eliminating confusing tangles and bundles of cables.
Full Fan In and Out Matrix Switch System shown here with the SFM 2150 Combiner
Features
Operating frequency ranges: Intermediate Frequency (5-200 MHz)
Modular designs allows for easy system installation and expansion
Controllable locally via front panel keypad or remotely via computer and are compatible with most monitoring and control systems, freeing up staff to attend to more critical tasks
Permit immediate routing of alternate signal sources
Solid-state switches provide seamless (nanoseconds) switching speeds
Maximize use of existing equipment with automated switching and scheduling; no need for duplicate equipment
The rear panel design facilitates structured cable routing, eliminating confusing tangles of cable
|
|
70 MHz |
140 MHz |
200 MHz |
|
Frequency: |
70 + 20 MHz |
140 + 40 MHz |
5-200 MHz |
|
Insertion Loss: |
0 + 1.0 dB |
0 + 1.0 dB |
0 + 1.5 dB |
|
Impedance: |
75 _ _(50 _ opt.) |
75 _ _(50 _ opt.) |
75 _ _(50 _ opt.) |
|
P1dB: |
+5 dBm |
+5 dBm |
+5 dBm |
|
Frequency Response: |
+ 1 dB |
+ 1 dB |
+ 1 dB |
|
Isolation (input-to-input): |
60 dB |
60 dB |
60 dB |
|
Isolation (output-to-output): |
60 dB |
60 dB |
60 dB |
|
Isolation (input-to-output): |
65 dB |
65 dB |
65 dB |
|
Return Loss: |
14 dB |
14 dB |
14 dB |
|
Control Response Time: |
1.26 msec. |
1.26 msec. |
1.26 msec. |
|
Switching Speed: |
40 nsec. |
40 nsec. |
40 nsec. |
|
Noise Figure: |
14 dB |
14 dB |
14 dB |
|
RF Connectors: |
Type "F", 75 _ _(BNC, SMA, or N optional) |
||
|
Power Requirements: |
100-240 V~ , 50/60 Hz. Dual AC inputs and dual internal PSUs for redundancy. |
||
|
Local Control: |
Front panel keypad with LCD display |
||
|
PC Remote Control: |
RS-232, RS-422/485, IEEE 488 (GPIB), or TCP/IP 10 BaseT via |
||
|
|
customer-supplied PC, SNMP, TELNET |
||
|
Inter-Module Control Data: |
Synchronous serial |
||
|
Mechanical: |
3 RU (5.25" H x 19" W x 20" D) |
||
|
Software: |
Basic IBM-compatible operating software and system protocol included |
||
|
|
with system |
||
|
Available Sizes: |
Any configuration up to and including 256 x 256 outputs |
||
Uplink and Downlink RF distribution applications, Content Delivery via Satellite
