Newtec MDM3300 VSAT IP Satellite Modem
Excellent for Enterprise / SME, Trunking, Cellular Backhaul, Government and Defense, Broadcast
MDM3300 IP Modem
The MDM3300 Satellite Modem is a 2-way (transmit and receive), high throughput platform that supports a wide range of IP Services like internet access, VoIP, enterprise connectivity, backbones for backhauling, contribution and multicasting services. Its ease of installation and high performance modulation techniques enable network operators to offer various bandwidth intensive services in a cost effective way.
VSAT Return Link Technology
The modem supports three return access technologies with the Newtec Dialog Platform: MF-TDMA, SCPC and the new patent
pending Mx-DMA (Cross-Dimensional Multiple Access). Mx-DMA incorporates MF-TDMA flexibility and on-demand variable bandwidth allocation at SCPC efficiency.
MF-TDMA satellite return technologies are typically targeting applications with highly overbooked and bursty traffic services, such
as Internet access for consumers, SME, B2B and SCADA. SCPC on the other hand has more applicability in high data and video rate return links. In between there is a large amount of applications with low to medium overbooked services and important throughput rates up to 21 Mbps where Mx-DMA comes into the game.
The modem combines different access technologies with different coding and modulation to match different application requirements. The 4CPM (Quaternary Continuous Phase Modulation) is ideal for low rate bursty traffic and HRC (High Res Coding) will optimize low to medium rate traffic. The high granularity of modcod choices in HRC provides the best modulation and coding for each link condition while the use of short block codes minimizes latency over satellite. For high rate traffic the MDM3300 modem supports S2 return technologies in SCPC.
High Broadband Data Rates
For a true broadband experience at minimal bandwidth consumption, the modem incorporates IP traffic enhancement software for TCP acceleration, pre-fetching, compression and encryption. Traffic can be classified in seven different QoS classes based on IP traffic characteristics (protocol types, source/destination address). Traffic in a specific class is given priority to match the Service Level Agreements.
Terminal Configurations
The Newtec MDM3300 modem is offered seperately or in combination with the ODU Portfolio- a set of different VSAT antenna sizes and BUC

Key Features
High performance unicast service rates up to 45/8 Mbps
Transmit multicast up to 21 Mbps
Receive multicast support (IGMPv2 / static configuration) up to 80Mbps
Robust design with 19” rack mount kit option
Embedded TCP acceleration and encryption
Multi-level Quality of Service with 7 Qos Classes
Low jitter for real time applications
DNS Cache/Relay and HTTP pre-fetching
Versatile IP routing and addressing
Support of IPv4 and IPv6
4CPM/MF-TDMA with Adaptive Return Link
HRC with Automatic Uplink Power Control and ACM
HRC/Mx-DMA and HRC/SCPC
SCPC / S2 with Adaptive Coding Modulation
Satellite Link Interface
FORWARD CARRIER (RX)
Standard: DVB-S2 ACM
Modulation: QPSK, 8PSK, 16APSK, 32APSK
Roll-off: 5, 10, 15, 20, 25 and 35 %
Symbol rate: 1 - 63 Mbaud (upto 47Mbaud for 16APSK, upto 38Mbaud for 32APSK)
RETURN CARRIER (TX) :
MF-TDMA /4CPM
Modulation: 4CPM with 6 modcods
Channel bandwidth: 128kHz to 4MHz
SCPC/HRC
Modulation: QPSK up-to 32APSK with 40 modcods
Roll-off: 5%
Symbol rate: 32kbaud - 5Mbaud
SCPC/S2
- Standard
DVB-S2 ACM (Short/Normal frames) S2 Extensions (Normal frames)
Modulation: QPSK, 8PSK, 16APSK, 32APSK
- Roll-off 5, 10, 15, 20, 25 and 35 %
Symbol rate 1-20 Mbaud
Performance
Max RX Rate TCP: 45 Mbps
Max RX Rate UDP: 40 Mbps (unicast) / 80 Mbps (multicast)
Max TX Rate TCP: 8 Mbps
Max TX Rate UDP: 8 Mbps (unicast) / 21 Mbps (multicast)
Modem Interfaces
RF OUTPUT (BUC INTERFACE)
Connector: "F"
Impedance: 75 Ohm
Frequency: 950 – 1850MHz
Tx Level: -55 to +5dBm
BUC Power Supply: 24VDC, 3.5A
Ref signal: 10MHz
RF INPUT (LNB INTERFACE)
Connector: "F"
Impedance: 75 Ohm
Frequency: 950 – 2150MHz
Rx Level: -65 to -25dBm
LNB power supply: 13/18VDC, 500mA
LOCAL AREA CONNECTION
4 x GbE (RJ-45) USB
USB 2.0 (future use)
Mechanical & Environment
Housing (W x H x D) 220 x 40 x 220mm
Weight 1.7 kg
Operating temperature 0 to 50°C
Humidity 5% - 95% non-condensing
Storage Temperature -30 to 60°C
Power supply
DC Power supply: 24V
Mains adaptor input: mains AC, 50Hz\210-260V and 60Hz\100-130V
Mains Power consumption: <120 Watt (depends on BUC type)
Modem Power consumption: <20 Watt
IP features
Protocols: UDP, IPv4 & IPv6, ICMP, IGMPv2, TCP, ARP, DHCP, DNS, DiffServ Marking
Management Interfaces
Web GUI
Over-the-air software & configuration updates
Over-the-air monitoring, self-test and diagnostics
Software release
Specifications valid for Release 3.0 compatible with Newtec Dialog® 1.1
Standards
EN 302307: DVB-S2
EN 301428: Ku VSAT spectrum usage
EN 301443: C VSAT spectrum usage
EN 301459: Ka VSAT spectrum usage
IEEE 802.3: 10T Ethernet
IEEE 802.3u: 100TX Ethernet
IEEE 802.3ab: 1000TX Ethernet
Internet / Intranet access, FNG/SNG live and file contribution, Backbone connections, Fiber Restoration, VoIP telephony (SIP, H.323), 2G/3G/Rural Cellular Backhauling, Fixed Government and NGO Networks