Terrasat IBUC 2G Ka-Band GaN Intelligent Block Upconverter (29.0 - 31.0 GHz) 40W
Freq. range 29.0 to 31.0 GHz, IF 1.0 to 2.0 Ghz, Input Connector Type-N female (50 Ohm), RF Output Interface WR28 UG cover with groove
IBUC 2G 40W Ka-Band Intelligent Block Upconverter
The Terrasat IBUC 2G 40W GaN is a revolutionary Block Upconverter with advanced features such as a Gallium Nitride amplifier for increased efficiency. Integrated fully automatic gain control is standard with all second generation GaN BUCs
The Ka-band 40W IBUC 2G Series also provides new interfaces for connecting you to extensive M&C facilities for network management or local access. This powerful M&C enables trouble‐free commissioning with easy, point‐and‐click installation/configuration, continuous verification of performance with time‐stamped alarm history and simplified monitoring of terminal status
IBUC 2G comes with a complete set of diagnostic tools including:
10 MHz input detector Input voltage and current monitoring Transmit L‐band input level detector Transmit RF output level detector User configurable thresholds and alarms
Unique to the IBUC-2G are internal AGC and ALC functions that satisfy demanding applications with stringent specifications.
|
Frequency range |
RF |
IF |
|
|
|
29 to 30 GHz |
1.0 to 2.0 GHz |
|
|
|
29.5 to 30.0 GHz |
1.0 to 1.5 GHz |
|
|
|
30 to 31 GHz |
1.0 to 2.0 GHz |
|
|
|
30.5 to 31.0 GHz |
1.0 to 1.5 GHz |
|
|
|
|
||
|
Input |
|
||
|
VSWR / Impedance |
1.5:1 max / 50 Ohm |
||
|
Input Connector |
Type N female (50 Ohm) |
||
|
Input Connector options |
Type F (75 Ohm), TNC (50 Ohm) |
||
|
Input power detector |
-55 to –20 dBm |
||
|
|
|
|
|
|
Gain |
|
|
|
|
Small Signal Gain (L-band to RF) with attenuator set to 0 dB |
|||
|
40W |
77 dB min |
|
|
|
|
|
||
|
Attenuator range |
30 dB variable in 0.1 dB steps |
||
|
|
|
|
|
|
Gain flatness |
|
|
|
|
Full band |
|
4 dB p-p max |
|
|
36 MHz |
|
1.5 dB p-p max |
|
|
|
|
||
|
Gain variation over temperature |
|
||
|
Open loop |
|
4 dB p-p max |
|
|
With AGC |
|
1 dB p-p max |
|
|
|
|
|
|
|
RF Output |
|
|
|
|
Interface |
WR28 UG cover with groove |
||
|
VSWR |
1.3:1 max |
|
|
|
|
|
|
|
|
Output power 40W |
|
|
|
|
Psat (typ) |
+46 dBm |
|
|
|
Plin (min) |
+43 dBm |
|
|
|
Plin is the maximum linear power as defined by MIL STD 188-164B |
|||
|
|
|||
|
Level stability with ALC ±0.5 dB |
|||
|
Output power detector range Rated power to –20 dB |
|||
|
Power reading accuracy ± 1.0 dB max. |
|||
|
|
|
|
|
|
Spurious @ Plin |
|
|
|
|
In Band |
-60 dBc |
|
|
|
Out of Band |
-60 dBc
|
|
|
|
|
|
||
|
AM/PM Conversion |
< 2 deg/dB @ Plinear |
||
|
|
|||
|
Output Noise Power Density, TX < -75 dBm/Hz |
|||
All commercial and military Ka-Band frequencies for transmit earth stations such as VSAT terminals, flyaway antennas and mobile video broadcasting
