Quintech Electronics Xtreme 80 L-Band (Fan-Out) RF Matrix Switching Module
Frequency range covers 950 MHz to 2150 MHz, various symmetric and asymmetric L-band switching configurations available
Xtreme 80 L-Band (Fan-Out) RF Matrix
The Quintech Xtreme 80 is a L-Band full fan-out (distributive), non-blocking matrix switch where any input can be routed to any or all outputs and features an industry exclusive flexible matrix architecture that supports both symmetric and asymmetric configurations of 80 combined inputs and outputs in a single chassis. Asymmetric configurations such as 16x64, 8x56, and more can be implemented as well as the standard 32x32 configuration. It is designed for maximum reliability with redundant power and control cards. The Xtreme 80 next generation L-band matrix switch features 80 ports in a compact 2 RU chassis.
Features
- Compact modular design with a variety of configurations adding to 80 ports in 2 RU
- Easy hot-swap of all RF cards, power supplies and control cards
- Independent input and output gain control
- Remotely controlled via web browser GUI interface, SNMP, Telnet or TCP/IP via customer supplied PC.
- 950-2200 MHz frequency range
- Compact modular design up to 80 ports in 2 RU chassis
- Asymmetrical configurations up to 64 outputs in a single chassis
- Adjustable gain and attenuation on all inputs amd outputs allows the user to adjust the RF level for optimum performance
- Embedded Web GUI interface
- Fast and easy hot-swap (less than 30 seconds) of any active cards
- Redundant hot-swap control cards plus independent GUI control systemRemotely controlled via web browser GUI interface, SNMP, Telnet or TCP/IP via customer supplied PC
Typical full fan in and out matrix switch system shown here
Benefits
Q-ROUTE Provides Internal Signal Path Redundancy by Automatically Re-routing Around a Failed Signal Path
Q-SENSE Provides External Signal Path Redundancy by Automatic Switching of Back-up Input Signals
Operating Frequency: 950-2200 MHz
Configurations: Various Symmetric and Asymmetric Configurations Available
Input Gain Range: -19.5 to +12 dB (32x32); -23.5 to +8 dB for (16x64)
Output Gain Range: -15 to +16
Impedance: 75 Ω or 50 Ω
Input P1dB: 0 dBm
OIP3: +10 dBm
Frequency Response: +/-1.5 dB
+/-0.5 dB Over Any 36 MHz Channel
Isolation (input-to-input): 60 dB
Isolation (output-to-output): 60 dB
Isolation (input-to-output): 55 dB
Input Return Loss: 14 dB
Output Return Loss: 14 dB
Noise Figure: 13 dB @ 0 dB Gain
RF Connectors: F-Type, BNC 75 Ω or 50 Ω, SMA, or Mixed
Power Requirements: 100-240 VAC Autoranging, 50/60 Hz
Power Consumption: 160 W
Remote Control: SNMP, TELNET, TCP/IP, Web Browser Interface Via Ethernet Remote Panel
Size: 2 RU: 3.5”H x 19”W x 22.5 D”
Content Delivery via Satellite, RF Matrix Switching Applications, supports both symmetric and asymmetric configurations of 80 combined inputs and outputs