Quintech PUL 140D 140 MHz to 1200 MHz Data Grade Upconverter
140 MHz IF to 1200 MHz L-Band Upconverter
PUL 140D Data Grade Frequency Upconverter
This product has reached end of life and is no longer available. Please contact Digisat for a suitable replacement.
The PULD01401200NZDD00 is an ultra-stable frequency converter that translates a 140 MHz IF channel to a 1200 LBand channel. Based on Quintech’s PLL stabilized fixed channel frequency converters, the PUL features a stability performance that meets the IESS 308/309 standard, and is suitable for current high speed data transmission rates and high order modulations.
Versatile
Quintech’s PUL Series L-band up converters are suitable for all current high-speed data transmission rates and advanced digital modulation schemes. They are frequently used in test loop translator applications and any application where it is necessary to convert between intermediate frequency and an L-band frequency.
Features
Very low phase noise characteristics, maintaining a cleaner signal
Ideal solution for test loop translator applications
Convenient, well organized rack mount configuration
Supports Legacy 70 MHz Equipment
System Configuration
Special Instructions
To utilize the PULD01401200NZD000, connect a 140 MHz line to the "140 MHz" connector on the rear panel of the unit. The 1200 MHz L-Band channel will be present at the L-BAND connector, also on the rear panel. Primary power required is 100-240 V~, 2 Amp via the IEC AC connector.
NOTE: The PULD01401200NZD000 has been designed for indoor use only. Opening the unit will immediately void the
warranty.
|
Input Frequency: |
140 MHz IF |
|
|
Output Bandwidth (-3 dB): |
80 MHz |
|
|
Input Power Level: |
-50 to -20 dBm |
|
|
Overall Gain/Loss: |
0 dB + 2 dB |
|
|
Output Frequency: |
1200 MHz, non-inverting |
|
|
L.O. Stability: |
+1 ppm |
|
|
Input Return Loss: |
12 dB |
|
|
Output Return Loss: |
10 dB |
|
|
Spurious: |
-50 dBc |
|
|
Phase Noise: |
Offset (Hz) (dBc/Hz) 10 -60 |
|
|
|
100 |
-75 |
|
|
1,000 |
-76 |
|
|
10,000 |
-78 |
|
|
100,000 |
-99 |
|
|
1,000,000 |
-110 |
|
Output Connector: |
Type F, 75 n |
|
|
Input Connector: |
BNC, 75 n |
|
|
Power Requirements: |
100-240 V~, 50/60 Hz |
|
|
Power Consumption: |
17 W |
|
|
Operating Temperature: |
+10o to +60o C |
|
|
Mechanical: |
1 RU (1.75" H x 19" W x 12.5" D) |
|
|
Weight: |
7.5 lbs. gross (boxed), 5.0 lbs. net |
|
Converts 140 MHz IF to a 1200 L-Band channel
