Novelsat NS1000 NS3 Satellite Video Broadcast Modulator
Input Frequency 950-1750MHz (optional up to 2150MHz) in 1Hz steps, Spurious -55dBc in band and out of band at max. power
NS1000 NS3 Modulator
The NovelSat NS3 NS1000 is a state-of-the-art video broadcast modulator designed for high demand satellite transmission. The 1000 series is the only system in the market that has NS3 enhancement, delivering significantly higher spectral efficiency compared to DVB-S2.
NS3 Modulation Features
Lower Satellite Bandwidth: Savings of 20% to 78% satellite bandwidth (over available DVB-S2 equipment in the market)
Higher Data Rate: Increases transmitted data rate by over 100% (over available DVB-S2 equipment in the market)
Smaller Dish: Reduction of dish size. Achieves the same data rate using a smaller dish
High Data Rate
The NS1000 supports high data rates of up to 365Mbps using 70Msps, which enables transmission of one carrier over a 72MHz transponder. The NS1000 dual-channel option enables any two inputs to be combined simultaneously over one carrier, each with a different modulation scheme using Variable Coding Modulation (VCM), one for each channel. This enables transmission quality that is dependent upon the interface content and the different receivers locations.
Multi Channel
Dual-channel operation also enables the combination of Ethernet streaming and the ASI interface, easing migration to IP streaming while controlling the QoS of each stream. NS3 achieves a remarkable data rate improvement of over 36% compared to DVB-S2, when working at high SNR links.
Features
Compatible with the innovative NS3 protocol
DVB-S, DSNG, DVB-S2 (EN300-421, EN301-210, EN302-307) compliant
Data rates of up to 365Mbps
Powerful pre-distortion algorithm for saturated channels
Dual-channel mode
L-Band output mode 950MHz-1750MHz (optional extended L-Band 950MHz-2150MHz)
IF output mode 50MHz-180MHz (either L-Band or IF)
Monitor output port
10MHz reference (In/Out)
Dual ASI input interface
Dual Ethernet 1Gb input interface
ACM support
|
Output Interfaces |
|
|
|
|
L-Band Output |
IF-Band Output |
|
|
|
SMA (F) 50 ohm Connector |
Connector |
BNC (F) 75 Ohm |
|
|
950-1750MHz (optional up to 2150MHz) in 1Hz steps Frequency range |
Frequency range |
70MHz±20MHz, 140MHz±40MHz in 1Hz steps |
|
|
-30/0 dBm in 0.1dB steps Power level |
Power level |
-30/0 dBm in 0.1dB steps |
|
|
±0.5dB/±0.5dBPower accuracy/ temp. stability |
Power accuracy/ temp. stability |
±0.5dB/±0.5dB |
|
|
>12 dBReturn loss |
Return loss |
>12 dB |
|
|
-55dBc in band and out of band at max. power Spurious |
Spurious |
-55dBc in band and out of band at max. power |
|
|
@100Hz -70dBc, @1KHz -80dBc, @10KHz -85dBc, Phase noise |
|
|
|
|
@100KHz -95dBc, @1MHz -100dBc |
|
|
|
|
Monitoring Output |
|
10MHz Reference Clock I/O (Optional) |
|
|
Connector |
SMA (F) 50 Ohm |
BNC (F) 50 OhmConnector |
|
|
Frequency |
Identical to L-Band/IF-Band output frequencies |
-3dBm up to +7dBm Ref. input power level |
|
|
Power level |
-40 dBm |
+7dBm Typical Ref. output power level |
|
|
Return loss |
> 7dB |
Sine wave Waveform |
|
Compatible with the innovative NS3 protocol, DVB-S, DSNG, DVB-S2 (EN300-421, EN301-210, EN302-307) compliant, Data rates of up to 365Mbps
