Newtec Azimuth Series AZ130 WAN Satellite Modulator
DVB-S2, Interfaces directly with terrestrial routers through HSSI
Newtec AZ130 WAN Satellite Modulator
This product has reached end of life and has been replaced by the Newtec M6100.
The AZ130 is a state-of-the-art DVB satellite modulator designed to interconnect two parts of a Wide Area Network (WAN) using routers with HSSI interfaces. This modulator can also be used in conjunction with the WAN satellite demodulator AZ930.
This AZ130 series interfaces directly with terrestrial routers through an HSSI interface with bit rates up to 52 Mbit/s (standard HSSI) or 110 Mbit/s (extended HSSI). At the output of the modulator, the signal is available on an L-band interface. IF band as well as BUC power supply and reference frequency are available as confi guration options providing a compact and cost eff ective solution.
Equalink
The AZ130 modulator is fully compliant with the DVB-S and DVB-S2 standards and provides exceptional performance and bandwidth efficiency. When activated, the unique linear and non- linear predistortion option Equalink provides an additional link margin improvement of up to 2,5dB, truly unleashing the full efficiency of higher modulation schemes such as 16- and 32APSK.
Key features
• DVB-S2 and DVB-DSNG/S compliant
• QPSK, 8PSK, 16APSK and 32APSK
• HSSI interface
• Max data rates up to 52 or 110 Mbit/s
• L-band monitoring output
• Programmable amplitude slope equalizer
• Integrated RF up converter
• Linear and non-linear predistortion (EqualinkTM)
• 10 MHz reference input/output
• Featured-based pricing and software upgradability
Main advantages
• Lower operational costs thanks to highest bandwidth efficiency
• High compactness
• Easy integration with standard routers
• Fully compatible with DVB standards
Input interface
HSSI interface
connector sub-D (F)
rate 0.05 - 110 Mbit/s
output levels ECL-10 kH (330 Ω ; -5 V)
input levels 0.15 - 1 Vptp (diff . 110 Ω)
Modulation
Supported modulation schemes and FEC
• DVB-S/DSNG:
Outer/Inner FEC: Reed Solomon /Viterbi
MODCODs:
QPSK:1/2, 2/3, 3/4, 5/6, 7/8
8PSK: 2/3, 5/6, 8/9
16QAM: 3/4, 7/8
• DVB-S2:
Outer/Inner FEC: BCH/ LDPC
MODCODS:
QPSK: 1/4, 1/3, 2/5, 1/2, 3/5,
2/3, 3/4, 4/5, 5/6, 8/9, 9/10
8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
16APSK: 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
32APSK: 3/4, 4/5, 5/6, 8/9, 9/10
Baud rate range
• DVB-S2 0,05 – 45 Mbaud
• DVB-S/DSNG 0.05 – 45 Mbaud
Frame length
• DVB-S/DSNG 188 bytes
• DVB-S2 Short Frames 16200 bits
• DVB-S2 Normal Frames 64800 bits
Roll-off factor
• 20 % - 25% -35%
Output interfaces
L-band output (default)
• Connector SMA (F), 50 ohms
• Return loss > 10 dB
• Frequency 950 - 1750 MHz (50 Hz steps)
• Level -50/-7 dBm (+/- 2dB)
IF-band (optional)
• Connector BNC (F) - 75 ohms (intermateable with 50 ohms)
• Return loss 50 ohms : > 14 dB 75 ohms : > 20 dB
• Frequency 50 - 180 MHz (50 Hz steps)
• Level -30/+5 dBm (± 3 dB)
L-band+IF (optional)
• L-band: same as above
• IF: fi xed 70 or 140 MHz frequency
-34/+1 dBm (+/- 3 dB) output level
RF-band (optional)
• Connector SMA (F), 50 ohms
• Return loss > 12 dB
• Frequencies 5.85-6.65 GHz
12.75-13.25 GHz
13.75-14.5 GHz
• Level -50/-7 dBm (+/- 3dB)
• Frequencies 17.30-18.10 GHz , 17.60-18.40 GHz
• Level -40/+3 dBm (+/- 3dB)
L-band monitoring output (default)
• Connector SMA (F), 50 ohms
• Return loss > 7 dB
• Frequency default: identical to L-band output. with options AA-02 / AA-06: 1080 MHz
• Level -45 dBm
BUC power and reference frequency (optional)
• Max. current 1,5 A
• Voltage 24V
• Frequency 10MHz
• Stability ±5x10-8 over 0°C to 65°C
Spurious performance
• better than -65 dBc/4 kHz @ -10 dBm level and > 256 kbaud
10 MHz reference input / output (optional)
• Connector BNC (F) – 50 ohms
• Input level -3dbm up to 7dBm
• Output level +7dBm
Internal Reference frequency
• High Stability (optional)
Stability ±5x10-8 over 0°C to 70°C
Ageing: ± 15 ppb/day
± 300 ppb/year
• Very High Stability (optional)
Stability ±2x10-9 over 0°C to 65°C
Ageing: ± 0.5 ppb/day
± 500 ppb/10 year
Generic
Monitor and control interfaces
• Web based GUI
• Diagnostics report, alarm log
• RMCP over TCP-IP/UDP and RS232/RS485
• SNMP v2c
Alarm interface
• Electrical dual contact closure alarm contacts
• Connector 9-pin sub-D (F)
• Logical interface and general device alarm
Physical
• 1RU, width: 19”, depth 51 cm, 6 kg
• Power supply:
90-130 & 180-260 Vac, 105 VA, 47-63 Hz
• Temperature
- Operational: 0°C to 40°C
- Storage: -40 to +70°C
• Humidity: 5% to 85% non-condensing
• CE label
Satellite interconnection of routers, High speed satellite links
