C-Com iNetVu FMA-120Ka 1.2M Ka-Band Motorized Auto-Acquire Fixed VSAT Antenna

iNetVu Ka-98H Hughes Ka-Band Antenna System

iNetVu Ka-98H Hughes Ka-Band Vehicle Mounted Drive Away VSAT Satellite Antenna System

iNetVu FLY-98G

iNetVu FLY-98G 98cm Ka-Band Flyaway Auto-Pointing VSAT Antenna

SKU
FMA12K
C-Com iNetVu FMA-120Ka 1.2M Ka-Band Motorized Auto-Acquire Fixed VSAT Antenna is available to buy in increments of 1

Motorized 1.2M ViaSat reflector, Ka-Band or Ku-Band Tx/RX or RX only operation

FMA-120Ka 1.2M Fixed Auto-Acquire VSAT Antenna

The iNetVu FMA-120Ka Fixed Motorized Antenna system is a 1.2m self-pointing auto-acquire unit that can be mounted as a permanent installation. It works seamlessly with the auto-pointing iNetVu 7024 controller and all L-Band satellite modems including iDirect and Comtech. It features "one touch" auto acquisition capability and enables users to access high throughput internet services via satellite and receive video broadcast services.   

Auto Satellite Acquisition

The FMA-120Ka series antenna automatically locates the satellite without any manual intervention, which makes this system an ideal choice for users without any satellite experience.

Key Features

FMA-120Ka Features 1.2m Off set, Glass Fibre SMC refl ector

FMA-120Ka Features Designed to work with the iNetVu® 7024 Controller

FMA-120Ka Features Works seamlessly with the world’s most popular commercially available satellite modems

FMA-120Ka Features 2 Axis motorization

FMA-120Ka Features Supports manual control when required

FMA-120Ka Features It is a cost eff ective solution for multi-satellite communication at any location

FMA-120Ka Features One button, auto-pointing controller acquires any Ku or C band satellite within 2 minutes

FMA-120Ka Features Locates satellites using the most advanced satellite acquisition methods

FMA-120Ka Features Eliminates costly repointing and network downtime due to inadvertent motion, satellite change, areas where ground shifts occur (earthquakes, landslides, mine blast zones, etc...)

FMA-120Ka Features Can be easily relocated when mounted on a semi-permanent platform without the need for any specialised equipment

FMA-120Ka Features Any compatible fi xed installation can be easily converted and upgraded to a fully motorised system

FMA-120Ka Features Supports Viasat 1.2m Ka antenna, Model 1244

FMA-120Ka Features Can be easily re-configured to support Ku-Band services as well

FMA-120Ka Features 1Year Warranty

Application Versatility

If you operate in Ka-band, the FMA-120Ka system is easily confi gured to provide instant access to satellite communications for any application that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Mining, Disaster
Management, Construction, Mobile Offi ces, Emergency Services, Cellular Backhaul and many others.

Specifications

arrow Antenna size: 1.2m (4 ft)

arrow Reflector Material: Glass reinforced polyester SMC

arrow Platform Type: 2 axis Motorized, Galvanized steel

arrow Antenna optics: Off set Feed

arrow Mast size: 2.5” SCH 80 pipe (3.0” OD)

arrow Elevation range: 0º to 90º

arrow Azimuth Range: 340º

arrow Polarization Range: Circular, Auto Switching

Environmental

Wind loading
arrow Operational 72 km/h (45mph)

arrow Survival 201 km/h (125mph)

Temperature
arrow Operational -30ºC to 55ºC (-22°F to 130°F)

arrow Survival -40ºC to 65ºC (-40°F to 150°F)

Electrical

arrow Elevation Actuator 24V

arrow Azimuth Actuator 24V

arrow Rx & Tx Cables 2 RG6 Cables -15m (50 ft) each

Control Cables

arrow Standard 15m (50 ft) Ext. Cable

arrow Optional Up to 60m (200 ft) available

arrow C-Band or Ku-Band operation (please specify)

 

 

Receive

Transmit

Frequency  (GHz)

19.70 to 20.20 GHz

29.5 to 30.0 GHz

Feed Interface 

Type F 

Type-F

Nominal G/T

23 dB/K @ 19.95 GHz

 

Nominal EIRP

54 dBWi @ 29.75 GHz

 

iNetVu FMA-120Ka PDF Specifications Page 1

iNetVu FMA-120Ka PDF Specifications Page 2

All TX/RX and RX only Ka-Band VSAT satellite applications where remote control pointing operation is required