ETL Systems 23179 16 x 1 IF / L-band LS Series Switch with Local and Remote Control
Available with SMA or BNC RF interfaces, 50 to 2150 MHz switch
23179 16 Way LS Series Switch
This ETL 23179 16x1 IF through L-band switch operates over the 50-2150MHz frequency range. The unit can be locally controlled using the keypad and display on the front panel, and remotely controlled via a Serial or Ethernet port on the rear panel.
The front panel HMI allows selection of the desired switch position, network configuration, shelf name and the ability to reboot the CPU. The switch benefits from dual redundant power supplies, which can be monitored via the serial or Ethernet port on the rear panel.
Switch Integration
As with all ETL switches the simple serial protocol facilitates rapid integration into most M & C systems.
RF Interface
This unit has 50 ohm SMA connectors but others are available (model numbers will vary).
23179-S5S5 comes standard with 50 ohm SMA connectors
23179-B5B5 comes standard with 50 ohm BNC connectors
RF Parameters |
|||
Capacity |
16 x 1 |
||
Frequency Range |
50-2150 MHZ (IF / L-band) |
||
Gain |
1.0 dB ± 1.0 dB nominal, mean across band |
||
|
|
||
Isolation I/P—O/P |
65 dB |
||
I/P—I/P |
70 dB |
||
1dB Compression |
+5 dBm |
||
Flatness |
± 1.0 dB |
||
Noise Figure |
17 dB |
||
Spurious In band |
<-95 dBm Typically <-105 dBm |
||
Out of band |
<-80 dBm 10MHz-3GHz |
Input Return Loss |
15 dB typical |
Output Return Loss |
15 dB typical |
|
Physical |
|
Input Connector |
|
SMA |
Input Impedance |
|
50n |
|
|
|
Output Connector |
|
SMA |
Output Impedance |
|
50n |
Dimensions |
|
1U high x 450mm deep x 19” wide |
Weight |
|
6 kg |
Colour |
|
White 00-E-55 semi-gloss |
System Control |
|
Local Control |
Via front panel push buttons and LCD Display |
Remote Control |
Via rear panel Serial (RS232/422/485) or Ethernet (RJ45) Port |
Display |
Front panel LCD Display |
16-way active L-band switching, great for carrier monitoring, includes remote and local control capabilties