CPI Satcom SA49KOA Outdoor 80W GaNLink Ka-Band SSPA
Saturated power of 80 watts across the standard 27.5 to 30 GHz frequency band
SA49KOA GaNLink 80W Ka-Band SSPA
CPI Satcom SA49KOA features cutting edge GaN device technology and utilizes proprietary RF techniques to provide high linear power and efficiency in small, lightweight, outdoor packages. This compact GaN HPA can be mounted directly at the antenna for maximum efficiency of operation. Full-featured network and serial interfaces are provided to support monitoring and control of the amplifier.
Applications
- LEO/MEO/GEO systems
- Satcom on the Move
- VSAT and antenna-mount applications
- Meets Electromagnetic Compatibility directive 2014/30/EU to satisfy worldwide requirements and is CE-marked.
Features
- 40 watts of linear output power using MCC Technology.
- Exceptional power efficiency
- 30 dB gain adjustment range
- Weatherproof package
- Integrated network and serial M&C interfaces
|
GaNLink™ 80 W Ka-band SSPA / BUC Specifications |
||
|
|
SSPA Model SA49KOA |
BUC Model SB49KOA |
|
ELECTRICAL SPECIFICATIONS |
||
|
RF Output Frequency |
27.5 to 30.0 GHz or 29.0 to 31.0 GHz |
27.5 to 30.0 GHz or 29.0 to 31.0 GHz (optional dual and triple output band BUCs, in switchable 1 GHz bands) |
|
Input Frequency |
27.5 to 30.0 GHz or 29.0 to 31.0 GHz |
950 to 1950 MHz or 1000 to 2000 MHz |
|
Spectral Regrowth (1) |
at 50 watts (47 dBm) output power, -25 dBc at 1.5 RS offset with 8PSK at 1 MB/second, 2/3 FEC (27.5 to 30.0 GHz) |
|
|
Spectral Regrowth (2) |
at 40 watts (46 dBm) output power, -25 dBc at 1.0 RS offset with OQPSK at 5 MB/second, 1/2 FEC (29.0 to 31.0 GHz) |
|
|
Gain |
63 dB min; 69 dB max. |
|
|
Gain Stability over temp, constant drive over 24 hrs, constant temp |
± 1.5 dB max. ±0.25 dB max. |
±2.0 dB max. ±0.25 dB max. |
|
Gain Flatness |
±1.75 dB max. full band; ±1.00 dB max. over any 45 MHz |
|
|
Small Signal Gain Slope |
±0.04 dB/MHz max. |
|
|
Gain Adjustment Range |
Up to 30 dB (0.1 dB steps) |
|
|
Input VSWR (50 Ω) |
1.5:1 max. |
|
|
Output VSWR (WR28) |
1.3:1 max. |
|
|
Load VSWR |
2.0:1 max. continuous operation; 1.5:1 max. full spec. |
|
|
Reference (MUX on IF) |
N/A |
10 MHz std; 10/50 MHz (specific BUCs only) |
|
Phase Noise (External Reference) |
N/A |
-120 dBc/Hz at 10 Hz -140 dBc/Hz at 100 Hz -145 dBc/Hz at 1 kHz -150 dBc/hz at ≥10 kHz |
|
Single Sideband Phase Noise |
N/A |
3 dB better than IESS 308/309 profile |
|
AM/PM Conversion |
2º/dB max. full spec. |
|
|
Spurious |
-60 dB max at Plin (excluding 2 MHz around carrier) |
|
|
Group Delay (per 80 MHz) |
Linear: 0.03 ns/MHz; Parabolic: 0.003 ns/MHz²; Ripple: 1.0 ns pk-pk |
|
|
Noise Power Density |
<-150 dBW/4 kHz under 20.2 GHz <-65 dBW/4 kHz, passband |
|
|
Prime Power |
48 VDC ±10% |
|
|
Power Consumption |
420 VA typ. at Plin; 600 VA max; 35 VA in mute |
|
|
MECHANICAL SPECIFICATIONS |
||
|
Dimensions |
13.2 x 6.4 x 6.3 inches (336 x 163 x 160 mm), see below or contact CPI for detailed outline drawing |
|
|
Weight |
16.5 lbs. (7.5 g); 19.8 lbs (9.0 kg), max. |
|
|
DC Power Input Connection |
Amphenol C016 10C006 000 12 |
|
|
RF input Connection |
2.9 mm female |
Type N female |
|
RF Output Connection |
WR28 grooved waveguide flange |
|
|
M&C Interface Ethernet Serial Interface |
RJ45 cable Multi-pin connector, see outline drawing |
|
|
RF Sample Output |
SMA female |
|
|
IF Sample Output |
SMA female |
|
|
GaNLink™ 80 W Ka-band SSPA / BUC Specifications |
||
|
|
SSPA Model SA49KOA |
BUC Model SB49KOA |
|
ENVIRONMENTAL SPECIFICATIONS |
||
|
Ambient Temperature Operating Non-Operating |
-40ºC to +60ºC -55ºC to +85ºC |
|
|
Relative Humidity |
Up to 100% RH condensing |
|
|
Altitude |
Operating: up to 10,000 feet (3048 m) above sea level, derated 2ºC for every 1000 feet above sea level (305 m); Non-operating: up to 50,000 feet (50,000 m) above sea level |
|
|
Cooling |
Integral forced air |
|
|
Shock and Vibration (operating) |
Operating: per MIL-STD-810F and MIL-STD-167-1A |
|
|
Shock and Vibration (non-operating in shipping container) |
MIL-STD-810F516 (Transit Drop); MIL-STD-810F514 (Transportation and Operational Service) |
|
|
Weatherproofing |
IP66 |
|
|
Sand and Dust |
Will operate in dry and dusty environments typical of arid locations |
|
|
Salt Spray |
Will withstand salty environments typical of coastal locations |
|
Perfect for LEO/MEO/GEO systems, Satcom on the Move, VSATs, and antenna-mount applications. Meets Electromagnetic Compatibility Directive 2014/30/EU to satisfy worldwide requirements and is CE-marked.