Baird VSAT Antenna Mount PXL-2 HD
Extra Heavy duty non-pen mount for all VSAT antennas up to 3.8 meters
PXL-2-HD VSAT Non-Pen Mount
The Baird Mounts PXL-2 H.D. (Heavy Duty) Non Penetrating Roof antenna supporting system provides heavy duty galvanized steel construction and large ballast trays. This heavy duty antenna mount is ideal for VSAT system applications up to 3.8 meters in size
MODEL: PXL-2 H.D.
Non-Penetrating or Penetrating flat roof antenna supporting system.
TYPICAL USAGE
1. Handles up to a 12.5' (3.8M) antenna.
Larger antennas may be used on the PXL-2 H.D.
However, each installation must be examined
to determine if the mount can withstand the
wind loads it may be subjected to at the site.
2. Ku & C band - transmit and receive.
3. Pad areas - 25.00 and 33.33 sq.ft.
4. Footprints
a. 4' x 6' = 17.7' x 17.7' = 313.29 sq.ft.
b. 5'4" x 6' = 20.3' x 20.3' = 412.1 sq.ft.
Finish - Hot dip galvanized
Mast Diameter - as required
Mast Height - as required
The mount if needed can be equipped with a
leveling device.
Ballast required will be recommended based on
antenna diameter, type and survival requirements.
It is the customer’s responsibility to see that all
applicable codes are satisfied. It is suggested
that a structural engineer review the application
of this product.
An engineering report is available to assist with
determining the proper amount of ballast.
A pad can be supplied to isolate the mount
from the roof surface.
Supports all VSAT antennas up to 14' in diameter including 3.8 meters including 2.4, 3.0 and .37M
