AVL Technologies Model 878KCB 85cm Motorized Mobile VSAT FlyAway Antenna System

AVL Technologies 1260 1.2m Manual Carbon Fiber Flyaway VSAT Antenna

AVL Technologies Model 1098FA 1.0m Mobile Motorized VSAT FlyAway antenna

Be the first to review this product

SKU

AVL-878KCB

AVL Technologies Model 878KCB 85cm Motorized Mobile VSAT FlyAway Antenna System is available to buy in increments of 1

Military Flyaway Antenna, Quick Deploy, Auto-Acquire

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

878 Series Mobile Satellite Internet Antenna

The AVL Technologies Model 878KCB 85cm Motorized Mobile VSAT FlyAway Antenna System offers the unmatched performance and reliability of the AvL fully motorized positioners. This antenna features the zero backlash AvL Cable Drive cable drive system and guarantees optimum pointing accuracy and pointing stability. Minimal maintenance is required on the KCB series antennas. The 878KCB can also be deployed very easily by one person in less than 15 minutes and the one button auto acquisition controller locates and precisely aligns the antenna in all three axis (azimuth, elevation AND polarization) to the required satellite.

Highly Portable

The rugged flight cases are designed to provide protection even in the most demanding environments. AvL's experience with antennas providing reliable operation throughout the world and in the climatic extremes with military, broadcast and disaster relief organizations is second to none. If your requirement is for a rapid deployable, fast and easy to use flyaway antenna that can survive rugged handling, guarantee satellite authority compliance and achieve pointing accuracy and pointing stability even in the most extreme conditions, then Digisat has the solution.

Features

Reflector: 90 x 80 cm (0.85 Meter Aperture) Single Piece Precision Composite

Optics: Offset, Prime Focus, 0.8 f/D

Interchangeable Feeds: 2-Port Ka-CP, Precision Ku-LP, 2-Port X-CP

Positioner Type: Case-based MVSAT

Drive System: AvL Cable Drive Positioner

Mount Geometry: Elevation over Azimuth

Polarization: Rotation of LP Feed

Technical Specifications

Model 878KCB Antenna
Reflector	90 x 80 cm (0.85 Meter Aperture) Single Piece Precision Composite
Optics	Offset, Prime Focus, 0.8 f/D
Interchangeable Feeds	2-Port Ka-CP, Precision Ku-LP, 2-Port X-CP
Positioner Type	Case-based MVSAT
Drive System	AvL Cable Drive Positioner
Mount Geometry	Elevation over Azimuth
Polarization	Rotation of LP Feed
Mechanical
Travel Azimuth Elevation Polarization	±200° 0° to 90° of reflector boresight from calibrated inclinometer ±95°
Speed Slewing/Deploying Peaking	2°/second Az, 1°/second El 0.2°/second
Motors	24V DC variable speed, constant torque
Emergency Axes Drives	Handcranks on Az and El; Knob on Pol
Stowed Configuration Positioner Additional Feeds	53.5” x 43.5” x 19.5”, 225 lbs. (estimate, Ka only) May be added to Case 1 with increased weight or in additional cases
Set-up Time	Less than 15 minutes, 8 minutes typical
RF Interface BUC Mounting Coax	Between Boom Arms or on Feed (max 24 lb BUC on Ka feed assembly) 50 ohm Coax (N & BNC) 2 each Tx and RX
Electrical Interface	Connector at positioner base, One 25 ft. cable with connectors to controller
Environmental
Wind Operational (not anchored) Operational (anchored) Survival (anchored)	Gusts to 30 mph 30 mph gusting to 45 mph 80 mph in stowed position
Pointing Loss in Wind Ku-Band Receive, Operational winds Ka-Band Receive, Operational winds	0.5 dB typical, 1.0 dB max 1.3 dB typical, 2.0 dB max
Temperature Operational Survival	-22° to 125° F (-30° to 52° C) -40° to 140° F (-40° to 60° C)