Intellian V60NX Ka Multi-Orbit Tracking VSAT Antenna

V100PM Military maritime VSAT antenna

Intellian Technologies v100PM MIL-STD-461/167 Ku / Ka-Band Antenna

Intellian 240C Radome

Intellian Technologies v240C 2.4M C-Band Maritime Satcom Antenna

SKU
IT-V60NX-KA
Intellian V60NX Ka Multi-Orbit Tracking VSAT Antenna is available to buy in increments of 1

Delivers access to all satellite orbits and constelattions operating over Ka-Band frequencies.

V60NX KA LEO MEO GEO Marine VSAT 

The Intellian V60NX Ka features a highly spectrally efficient design and outstanding RF performance compared to other 60cm class systems, enabling high-througput data speeds and worldwide connectivity. The antenna's ultra compact footprint enables it to be mounted on even the smallest of vessels, all while allowing the system to operate on satellite networks designed for smaller antennas. The reflector and radome have been extensively frequency tuned for Ka satellite bands, which ensures maximum performance across both Ku and Ka-Bands. The 60NX KA series is also ready for future NGSO constellations as well as 2.5GHz wideband Ka frequencies.

Intellian’s highly efficient RF design delivers the best performance compared to other 60cm class systems, enabling higher data rates and global operation. The compact 60cm antenna’s smaller footprint allows installation on smaller vessels and gives them access to 1-meter designed networks. It also has several different BUC power options available that give it a wider operational range. The v60NX KA antenna is ideal for commercial ships, the oil and gas industry, and mission-critical operations where uninterrupted connectivity is required. 

Modularized Components

With the modular component design, the number of spare parts is significantly reduced by more than 30%. It now only needs 13 common spare parts to fix most potential problems. Thus, its reliability is improved, its maintenance is simpler, and the total cost of ownership for the system is lowered.

Simplified Installation

Combining Tx, Rx and DC power into one coaxial cable solution with an external dome-on connection enables faster and reduced costs of installation. It also eliminates the need to remove the radome during installation. Users can operate AptusNX by simply plugging a laptop into the ACU, without any need to download extra software. The M&C system presents an installation wizard with a step-by-step commissioning guide to more easily complete setup, and with enhanced diagnostic capabilities, Aptus can send an alert to the operator when preventative maintenance is required.

Frequency Flexibility

  • Best RF performance on all major satellite networks

  • Ka-band operation with high gain and precision tracking

Supports a wide range of BUCs

  • Various BUC options provided 8W, 16W and 25W as standard

  • No need to rebalance the system after BUC conversion

Dual Antenna system operation without an external mediator

  • Mediator embedded ACU supports dual antenna operation to combat onboard blockage zones without a separate mediator

V60NX Ka Antenna System Config Diagram

Dual Antenna Configuration Diagram

V60NX Ka Dual Antenna Configuration Diagram

Antenna Dimensions

V60NX Ka Antenna and Radome Dimensions

Intellian v60NX Ka X-pol and Co-pol w/o BUC

Part Number:V5-60NX-KA

Mediator Interface

Yes (Embedded in ACU, Primary / Secondary control on AptusNX)

Modem Interface

Ethernet port / RS-232C, -422C / I / O Console)

Remote Management

Yes

Wi-Fi Operation

Yes (w/ Wi-Fi dongle)

Management Port

Yes

Intellian LAN Port

Yes

Power Requirement

100~240 V AC, 50~60 Hz, 4A)

Ka-band compatibility for GEO, MEO and LEO satellite networks.