UHP Networks UHP-200 Software Defined Universal VSAT Router
Small size, low power consumption and low count of active electronic components ensure highest reliability with over 200,000 hours MTBF.DVB-S2 ACM VSAT technology, Compatible with all C, Ku, X and Ka-band RF Systems,
UHP-200 VSAT Satellite Router
UHP Networks UHP-200 is a universal VSAT router with Software-Defined Architecture. The device packs ultra-high processing capability into a very compact size with power consumption under 12W. It can process up to 450 Mbps of aggregate traffic. The 200 series comprises two DVB demodulators, four TDMA burst demodulators, a universal TDMA/SCPC modulator and a powerful IP router capable of processing over 190,000 IP packets per second (PPS). The high processing capability allows implementation of uniquely efficient protocols for network access, resource allocation and data encapsulation as well as support for advanced modulation and coding.
Features
World’s fastest VSAT router with aggregate throughput up to 450 Mbps and powerful UHP-RTOS
Two independent DVB demodulators with software-switchable IF inputs and rate up to 500 Msps
Efficient DVB-S2/S2X ACM modulations with 5% or 20% roll-off and support for HTS
One MF-TDMA demodulator with innovative protocol and proven efficiency of 96% vs. SCPC
Adaptive coding and modulation (ACM) in forward/return channels, including SCPC/TDMA modes
Various modes of operation and topologies: SCPC, TDM/ TDMA Star&Mesh, Hubless TDMA
HTS-ready VSAT with support of multiple beams, bands, satellites reception with traffic balancing
Superior IP router productivity up to 190 000 PPS and rich set of supported protocols, QoS
Layer 3 routing architecture and Layer 2 bridging mode with IPv6 transport
Two Gigabyte Ethernet user ports with built-in switch simplifies scalability and connection of CPE
Ultra-low latency with round-trip delay about 570 ms for TDMA mode of operation
Ultra compact full-scale Hub with multiple MF- TDMA channels and up to 2,000 terminals
1:1 automatic redundancy without external controllers or M:N Smart Redundancy
Highly Versatile
The UHP200 is ideal for applications such as:
Enterprise networking
Videoconferencing
Distribution and contribution of video
Voice and data trunking
Cellular backhaul
Broadband Internet access.
Router Intereconnect Cabling
Dual Gateway
Delivers an optimum solution for hierarchical networks and makes it possible to design such networks with single-hop connectivity using low-cost VSAT terminals and affordable Regional Gateways. The Central Gateway has a TDM/TDMA Hub with at least one DVB carrier (TDM) and several TDMA return carriers. The Regional Gateway also transmits a DVB carrier and is capable of receiving one or more TDMA carriers.
Beam Switching
Uses OpenAMIP protocol to communicate with a mobile antenna controller to retrieve an actual geographic location and command antenna pointing, activate transmission, etc. The router selects the most appropriate satellite beam according to its current geographic position and pre-defined coverage maps, dynamically adjusts frequencies, levels and changes the mode of operation to ensure compatibility with new network.
|
Topology |
Point-to-Point, Star, Mesh, Dual-Gateway, Hubless |
|
|
Modes of operation |
Software-defined router: SCPC, SCPC DAMA, TDM/SCPC, TDM/TDMA Star/Mesh, Hubless TDMA |
|
|
Network role |
SCPC Modem, TDM/TDMA Terminal or Hub, Universal Controller of HTS Hub, Hubless Slave or Master |
|
|
Standard |
DVB-S2 / DVB-S2X with Adaptive Coding and Modulation |
|
|
Channels |
One universal SCPC/TDMA modulator |
Two demodulators with selectable IF inputs |
|
Modulation |
QPSK, 8PSK, 16APSK, 32APSK, 64APSK; Roll-off: 5% or 20% |
QPSK, 8PSK, 16APSK, 32APSK, 64APSK, 128APSK, 256APSK; Roll-off: 5% or 20%; |
|
|
1/4, 14/45, 1/3, 2/5, 9/20, 7/15, 1/2, 8/15, |
|
|
FEC |
11/20, 26/45, 3/5, 23/36, 2/3, 25/36, 32/45, |
All DVB-S2 & DVB-S2X MODCODs |
|
|
13/18, 3/4, 7/9, 4/5, 5/6, 77/90, 8/9, 13/45 |
|
|
Symbol Rate |
300 ksps -64 Msps; step 1 ksps (51 Msps @32APSK, 43 Msps @64APSK) |
300 ksps -500 Msps |
|
Data Rate |
150 kbps -225 Mbps |
|
|
QoS |
8-level prioritization, traffic policies, CIR, MIR, group QoS, hierarchic traffic shaper, FAP |
|
|
Standard |
LDPC TDMA with Adaptive Coding and Modulation |
|
|
Channels |
One universal SCPC/TDMA modulator Four-channel MF-TDMA demodulator |
|
|
Modulation |
QPSK, 8PSK, 16APSK; Roll-off: 5%, 20% |
|
|
FEC |
1/2, 2/3, 3/4, 5/6 |
|
|
Symbol Rate |
100 ksps -11 Msps; step 1 ksps |
|
|
Data Rate |
100 kbps -35 Mbps |
|
|
TDMA Protocol |
Frame 50 -1000 ms, 14 slot sizes, manageable minimal bandwidth; fast MF-TDMA hopping |
|
|
QoS |
8-level prioritization, traffic policies, CIR, MIR, group QoS, hierarchic traffic shaper, FAP |
|
|
Performance |
Up to 190 000 packets per second |
|
|
Support |
DSCP, multiple IP/VLANs, PAT, proxy ARP, L2 Bridging, TCP Acceleration, Jumbo frames, AES-256 |
|
|
Protocols |
IPv4/IPv6, IGMP, cRTP, SNMP, RIP, SNTP, TFTP, PPP, DHCP, DHCP Relay, OpenAMIP |
|
|
Management |
HTTP interface, SNMP, Telnet, NMS with VNO support |
|
|
User LAN |
2 x Gigabit 10/100/1000 Base-T |
|
|
Maintenance console |
miniUSB, B female |
|
|
IF Rx (both inputs) |
950-2150 MHz; Ref. 10 MHz/+5 dBm [RX2]; 13.5/18 VDC 0.75A; F type |
|
|
IF Tx |
950-2150 MHz, -1…-46 dBm; Ref. 10 MHz/+5 dBm; 24V/3A; F type |
|
Operates as a star or mesh TDM/TDMA remote or as a Tx/Rx SCPC IP modem, or as a node in a Hubless TDMA (full mesh) network, or as a building block (universal controller) in a large TDM/TDMA Hub.
