UHP Networks UHP-100 Broadband TDMA Satellite Router
MF-TDMA modulator, Ultra-low latency, Enhanced DVB-S2, QPSK, 8PSK, 16APSK and 32APSK, DVB demodulators with separate IF inputs
UHP-100 Broadband Satellite Router
The UHP Networks UHP-100 Broadband Satellite Router is a high-performance modem designed specifically for large scale rapid deployment in broadband VSAT networks operating over High-Throughput Satellites. This router combines the Universal Hardware Platform advanced architecture, which was developed in the previous generation of the award-winning UHP product line, with the state-of-the-art semiconductor technology.
The result is its unique performance. Not only can the UHP-100 process 200,000 IP packets per second, 210 Mbps of traffic and two 65 Msps carriers, it can do this in a supercompact size, with low power consumption (less than 10W) and with best utilization of the precious satellite resource, as evidenced by up to 32APSK modulation, 5% spectral roll-off, adaptive modulation and coding, adaptive power control and 96% efficient TDMA protocol.
UHP-100 Features
Small size, ideal for rack mounting
RoHS Compliant
High-performance Satellite Router for TDM/TDMA networks with aggregate throughput above 200 Mbps
Two independent DVB demodulators with separate IFinputs and rate up to 65 MSps
Enhanced DVBS2, QPSK, 8PSK, 16APSK and 32APSK modulations with 5% or 20% rolloff
MFTDMA modulator with innovative protocol and proven efficiency of 96% compared to SCPC
Adaptive coding and modulation and transmission power control in forward and return channels
Dual satellite or dual band operations with dynamic traffic balancing and automatic beam switching
Superior IP router productivity up to 200’000 pps and reach set of supported protocols, including L2 bridging
Support of VLAN, multilevel QoS, codec independent handling of RT traffic, TCP acceleration, AES encryption
Built-in adaptive hierarchic traffic shaper specially designed for VSAT applications
Two Ethernet user’s ports with built-in switch simplifies connection of CPE and maintenance
Ultra-low latency VSAT system with roundtrip delay about 570 ms for TDMA mode of operations
Fast network startup — network is ready for use in less than a minute upon power up
Low power consumption – less than 10 Watt (without RF ODU)
Highly Versatile
The UHP100 is ideal for applications such as:
Mobile Terminals
SCADA
Cellular backhaul
Multimedia connectivity in large VSAT networks using HTS.
Router Intereconnect Cabling
UHP-100 Specifications
Modes of operation TDM/TDMA, Rx-only SCPC
Network role TDM/TDMA terminal, SCPC receiver
Frequency bands C, X, Ku, Ka, including multi-beam HTS satellites
Compatibility UHP-200 or UHP-1000 based Hubs
TDM (SCPC) CHANNEL - Two demodulators with selectable IF inputs
Modulation DVB S2 ACM: QPSK, 8PSK, 16APSK, 32APSK; TLC; roll-off 5% or 20%
Symbol rate 300 ksps - 65 Msps with 1 ksps step
Data rate 200 kbps - 210 Mbps (210 Mbps of aggregate rate for two demodulators)
QoS 4-level prioritization, traffic policies, CIR, MIR, group QoS, hierarchic traffic shaper, FAP
TDMA CHANNEL (Tx-only)
Modulation BPSK*, QPSK, 8PSK; ACM; TLC; roll-off 5% or 20%
Symbol rate 100 ksps - 4 Msps (8* Msps); 1 ksps step
TDMA Protocol frame 30-1000 ms, 8 slot sizes, manageable minimal bandwidth; slot-to-slot fast MF-TDMA hopping
QoS CIR, MIR, group QoS, FAP, RT traffic support, day/night, hierarchic manager of TDMA bandwidth
Router
Performance up to 200’000 packets per second
Support DSCP, multiple IP/VLANs, NAT, proxy ARP, L2 Bridging, TCP Acceleration, AES-256 encryption
Protocols DHCP, IGMP, SNMP, RIP, SNTP, TFTP, сRTP
Management HTTP interface, SNMP, Telnet, NMS with VNO support
Interfaces
User LAN 2 x Fast Ethernet, RJ-45
Maintenance console MiniUSB, B female
IF Rx 950-2150 MHz (LO 10 MHz / +5 dBm, LNB DC – 13.5V/18V 0.75A), F type
IF Tx 950-1750 MHz (optionally up to 2150 MHz), –45…- 5 dBm, (LO 10 MHz/+5 dBm, 24V/2A), F type
MECHANICAL / ENVIRONMENTAL (IDU)
Power 24 VDC or 90-264 VAC (ext. power supply), 10 W
Operating temperature 00…+500C, humidity up to 90%
Size / Weight 147х144х29 mm / 530 g
The UHP Networks UHP-100 series router is ideal for broadband, SCADA, cellular backhaul and multimedia connectivity in large VSAT networks using HTS. The terminal interworks with the latest generation of scalable UHP TDM/TDMA Hubs.
