Paradise RCP2-1000-CO Compact Outdoor SSPA Remote Controller Panel
Monitors and controls all compact outdoor SSPA systems by Paradise Datacom
RCP2-1000-CO Compact Outdoor SSPA Remote Controller Panel
The Paradise Datacom Remote Control Panel (RCP2-1000-CO), was designed to provide easy remote monitor and control of Teledyne Paradise Datacom’s Compact Outdoor Solid State Power Amplifier.
Control of the RCP2-1000-CO can be handled through Front Panel operation, or remotely through Parallel or Serial communication to a remote computer.
The RCP2-1000-CO front panel includes ten LEDs that indicate the internal state of the Compact Outdoor SSPA. Five fault condition LEDs on the left side of the front panel indicate any SSPA major faults, in addition to a summary fault state.
Easy Interface
A 2 line by 40 character front panel display provides an extremely user friendly interface. Virtually all of the controller’s setup and adjustments are accessible from the display.
Four navigation buttons and a separate Enter key allow the user to navigate the firmware menu on the display. Separate buttons have been provided for frequently used functions.
Built-In Isolation
Common feed interfaces are offered as standard and isolation is provided at all RF interfaces.
A range of RF hardware options is offered to meet specific system requirements.
RCP2-1000-CO Specifications
|
Characteristic |
Specification |
|||
|
Configurations |
RCP2-1000-CO; Remote Control Panel for Compact Outdoor SSPA |
|||
|
Serial Communications |
RS-232 / RS-485 2-wire |
|||
|
Parallel I/O Status Outputs Control Inputs |
Form C Relay Contacts (10 sets) Contact Closure to Ground |
|||
|
AC Input Power |
85-265 VAC, 47-63 Hz, 1 A max, >0.93 power factor |
|||
|
Mechanical Dimensions |
1.75 in. H x 19 in. W x 13.3 45 mm H x 483 mm W x 3 |
|||
|
Weight |
5 lb. (2.3 kg) |
|||
|
Environmental Temperature |
0 - 50o C |
|||
Controls all Paradise Datacom Compact SSPAs
