Quintech Electronics LS16 2150A 16-Way Active L-Band Splitter (950-2150 MHz)

quintech ls12 2150a

Quintech Electronics LS12 2150A 12-Way Active L-Band Splitter (950-2150 MHz)

quintech ls24 2150a

Quintech Electronics LS24 2150A 24-Way Active L-Band Splitter (950-2150 MHz)

$490.00
SKU
LS16-2150A
Quintech Electronics LS16 2150A 16-Way Active L-Band Splitter (950-2150 MHz) is available to buy in increments of 1

1x16 way Splitter, 950 to 2150 MHz

LS16 2150A 16-Way Active L-Band Splitter (950-2150 MHz)

The Quintech LS16 2150A 1FVA000 is a commercial quality 16-way splitter that meets strict level and match specifications achieved through the use of Quintech's proprietary microstrip and SMT technology. It operates over the 950-2150 MHz frequency range and permits signal splitting with zero loss, eliminating the need for external distribution amplifiers. The LS162150A1FVA000 provides LNB DC power insertion that can be switched on or off via the front panel mounted slide switch (see LNB Power specification below).

 

LS16 2150A Interface

No Loss

The LS 2150A Series commercial quality active (zero loss) L-band splitters meet strict level, match, and loss specifications achieved through the use of Quintech's proprietary microstrip and SMT technology. They operate over the Satellite L-band (950-2150 MHz) frequency range and enable the splitting of L-band RF signals with repeatable performance over the entire frequency range and across all I/O ports

System Diagram

Features

Convenient, centralized rack mount designs improve cable management.

Microstrip design provides better performance and reliability.

Larger configurations eliminate cascaded combiners for better performance.

Active (zero loss) combiners allow for ease in RF budget design.

Custom configurations for optimization of rack space and increased flexibility.

Greatly improves cable management and aesthetics by allowing for easy access to cable routing and easing identification of cabling.

Reduces cable connector failures by eliminating the need for frequent manual connects/disconnects. 

Frequency:

 950-2150 MHz

Impedance:

 75 Ω

P1dB:

 0 dBm

OIP3:

 +10 dBM

Insertion Loss:

 0 + 2 dB

Frequency Response:

 + 2 dB

Isolation:

 18 dB

Input Return Loss:

 14 dB

Output Return Loss:

 12 dB

Noise Figure:

 8 dB

RF Connectors:

Type F, 75 Ω

Power Requirements:

 18-24 V

, @ 1 A via 2-pin quick connect barrier strip

LNB Power:

 18 V

 (800 mA max. available for LNB power)

Power Consumption:

12 W (plus customer LNB power load)

Mechanical:

1 RU (1.75" H x 19" W x 6.5" D)

Weight:

5.0 lbs. gross (boxed), 2.5 lbs. net

Certifications:

CE, NRTL / TUV, FCC Part 15

950 to 2150 MHz L-Band RF signal distribution, Satcom & VSAT Systems