DEV 8² (8 Squared) 8X8 L-Band Distributing Matrix

SKU
QT-DEV82
DEV 8² (8 Squared) 8X8 L-Band Distributing Matrix is available to buy in increments of 1

DEV 8² L-Band Distributing Matrix

The DEV 8² RF matrix switch features up to 8 inputs and 8 outputs in the most compact 1RU chassis. The 8² is a full fan-out, non-blocking RF matrix switch where any input can be routed to any or all outputs. Designed for high reliability and uptime, the switch features redundant power supplies. The flexible backplane allows the user to choose between 50Ω and 75Ω connectors, or a combination of both. Input connectors have the option for fiber optic receivers. The 8² has the option to provide 13/18 V LNB power and 22 kHz tone to remotely switch between LNB polarities and bands. Manual gain and tilt control allow the user to adjust power levels for optimum signal performance, and RF sensing with optional signal level recording help diagnose signal quality.

  • Route multiple satellite feeds to multiple receivers or modems
  • Automatically route signals for monitoring & control
  • Monitor input levels to detect loss of signal conditions
  • Reconfigure test configurations for compliance & interoperability testing
  • Automatically connect back-up signal on primary feed loss

Features

  • Compact, modular design – 8x8 in 1 RU
  • Operating range covers L-band 950-2150 MHz
  • Up to 35 dB variable gain and 8 dB of tilt control
  • Redundant hot-swap power supplies

Benefits

  • Additional output monitoring port
  • Optional input fiber optic receivers
  • Input channel redundancy
  • LNB power 13/18 V and 22 kHz tone

Specifications

Operating Frequency: 950-2150 MHz

Configuration: 4x8, 8x4, 8x8

Gain Range: 0 to +35 dB in 1 dB Steps

Impedance: 75 Ω or 50 Ω

OP1dB: 0 dBm

OIP3: < -40 dBc (two tones @-8 dBm)

Max RF Input Power, No Damage: +25 dBm Max.

Frequency Response: ± 3.0 dB (over entire band)

Isolation (input-to-input): 60 dB Typ.

Isolation (output-to-output): 60 dB Typ.

Isolation (input-to-output): 60 dB Typ.

Input Return Loss: >14 dB

Noise Figure: <14 dB

RF Connectors: F-Type, BNC 75 Ω, SMA

Optical Input Connectors: Groups of 4

Fiber Type: SMF

Optical Connector Type: LC/APC

Wavelength Range: 1100 to 1650 nm

AC Input Power: Autoranging 100 to 240 VAC

Power Consumption: <40 W

Local Control: Front Panel 2.2” Display with Rotary Switch Joystick

Remote Control: TCP/IP SNMP, Web Browser GUI

Mechanical: 8x8 in 1 RU: 1.75” H x 19” W x 18.5” D

Weight: 13.2 lbs