Norsat 9500HC-4 High Stability Ka-Band PLL LNB (20.2 - 21.2 GHz) ±50 kHz F or N-Type
Norsat’s Low Noise Blocks (LNBs) provide signal reception for satellite communications around the world. We offer premium performance and reliability in the smallest form factor possible. All of our standard LNBs are backed by a 3 year warranty and nearly forty years of experience as the industry’s leading provider of high performance RF components.
9500HC-4 Ka-Band PLL LNB
The Norsat 9500HC-4 High Stability Ka-band PLL LNB features cutting edge LO stability allowing users to reliably receive a narrower band transmission signals from Ka satellite networks. The 9500HC-4 series input frequency is 20.2 to 21.2 GHz, L.O.: 19.25 GHz, L-band IF: 950 to 1950. Additional frequencies are available in five separate sub-bands:
.
L.O. Stability: ±50 kHz
Input: (waterproof) WR-42 waveguide
Output: (waterproof) F-connector (75 ohm), N (Optional) (50 ohm)
KEY SPECIFICATIONS |
|
| Product Family | 9000 Series |
| Band | Ka-Band |
| LO Type | PLL |
| # of onboard LOs | Single-band |
| LO Stability | +/- 50 kHz |
| Noise Figure | 1.6 dB |
| Input Frequency - Band 1 | Ka-Band: 20.20 - 21.20 GHz |
| Output Frequency 1 | L-Band: 950 - 1950 MHz |
RF |
|
| LO Frequency 1 | 19.25 GHz |
| Phase Noise @ 1KHz offset | -70 dBc/Hz |
| Phase Noise @ 10KHz offset | -80 dBc/Hz |
| Phase Noise @ 100KHz offset | -95 dBc/Hz |
| Conversion Gain | 60 dB typ |
| Output P1dB compression point | 5 dBm |
ELECTRICAL |
|
| Power Requirements | 12 - 24 V |
| Current Drain | 400 mA |
INTERFACE |
|
| RF Input Connector | WR-42 waveguide grooved |
| RF Output Connector | F-75 Ohm |
M & C |
|
| LED Indicators | None |
ENVIRONMENTAL |
|
| Temperature - Operational | -30 to +60°C |
| Humidity | 0 - 95% |
PHYSICAL |
|
| Dimensions (L x W x H) | 118 x 60 x 45 mm |
| Weight | 450 g |
Internet service, TVRO, IP data. Use on all fixed earth stations, flyaway VSATs, Maritime