Newtec Satcom MDM5010 High Throughput Satellite Modem
High performance unicast service rates up to 400/150 Mbps, Transmit multicast up to 200 Mbps, Receive multicast support (IGMPv2/static configuration) up to 400 Mbps
MDM5010 High Throughput Satellite Modem
The Newtec MDM5010 Satellite modem is a super high throughput modem capable of handling more than 500 Mbps of traffic. With a symbol rate ranging from 1 up to 500 Mbaud and coding from QPSK to 256APSK in the forward channel, it enables network operators to set-up almost any type and size of network on any available type of satellite – for example, traditional FSS, next generation High Performance Satellites, HTS.
The MDM5010 series supports a wide range of IP Services including internet/intranet access, Voice over IP (VoIP), backbones for mobile backhauling and trunking, fibre restoral/ backup services, contribution and multicasting services. The high spectral efficiency, high packet and bit rate capability makes the 5010 a perfect fit for very bandwidth-intensive services in the enterprise, backhauling, offshore and maritime markets.
Return Link Technology
The modem supports S2 Extensions SCPC in the return, which allows for highly efficient, medium to high rate dedicated return bandwidth, ranging from 1 to 133 Mbaud for applications such as high speed IP backbones, cellular backhauling, trunking, maritime, mobility and file/video contribution. MF-TDMA mode enables low rate overbooked and bursty traffic profiles for inactive sites in business continuity networks, small cell backhaul networks or for always-on connectivity in occasional use networks. The third mode, Mx-DMA, combines the best of both worlds and fills in the gap between MFTDMA and SCPC.
Quality of Service
For a true broadband experience at minimal bandwidth consumption, the 5010 modem incorporates IP traffic enhancement software for TCP acceleration, GTP optimization/ acceleration, compression, packet aggregation and encryption. Traffic can be classified in seven different QoS classes based on IP traffic characteristics. This allows the network operator to provide a flexible hierarchical QoS model depending on any application’s SLA.
Key Features
- High throughput upstream and downstream capabilities
- DVB-S2X forward and MF-TDMA, S2 Extensions SCPC and Newtec patented Mx-DMA return link capabilities
- The most optimal modulation and bandwidth allocation while guaranteeing the highest efficiency and availability
- Bolstered with Newtec’s technologies FlexACM, Point & Play, HRCTM
- Easy to use multilingual web GUI for installation, diagnostics and troubleshooting
Satellite Link Interface
FORWARD CARRIER (RX)
• Standard DVB-S2/DVB-S2X
• Modulation QPSK, 8PSK, 16APSK, 32APSK, 64APSK, 256 APSK
• FEC BCH/LDPC
53 MODCODs (normal frames):
QPSK: from 1/4 to 9/10
8PSK: from 3/5 to 9/10
16APSK: from 26/45 to 9/10
32APSK: from 32/45 to 9/10
64APSK: from 11/15 to 5/6
128APSK: 3/4; 7/9
256APSK: 32/45; 3/4
13 linear MODCODs (normal frames):
8APSK-L: 5/9; 26/45
16APSK-L: from 1/2 to 2/3
32APSK-L: 2/3
64APSK-L: 32/45
256APSK-L: 29/45 to 11/15
41 MODCODs (short frames):
QPSK: from 11/45 to 8/9
8PSK: from 7/15 to 8/9
16APSK: from 7/15 to 8/9
32APSK: from 2/3 to 8/9
• Roll-off 5, 10, 15, 20, 25 and 35 %
• Symbol rate 1 Mbaud to 500 Mbaud
RETURN CARRIER (TX)
• MF-TDMA mode
Modulation Scheme 4CPM
(Quaternary Continuous Phase Modulation)
Channel bandwidth 128, 192, 256, 384, 512, 768, 1024, 1536, 2048, 2560, 3072, 3584, 4096 kHz
MODCODs 0, 1, 2, 3, 4, 5
• Mx-DMA mode
Modulation Scheme HRC
Modulation QPSK up-to 32APSK with 40 MODCODs
Roll-off 5%
Symbol rate 32 kbaud - 20 Mbaud
VL-SNR spreading 2 -12 on 10 MODCODS
• SCPC mode
Modulation scheme DVB-S2, S2 Extensions
Modulation QPSK, 8PSK, 16APSK, 32APSK
FEC 1/4, 1/3, 2/5, 1/2,3/5, 2/3,3/4,4/5, 5/6, 8/9, 9/10
Roll-off 5, 10, 15, 20, 25 and 35 %
Symbol rate 1-133 Mbaud
