International Datacasting Profline RS 1100 Redundancy Switch System
Automatic or manual switching for iDC Equipment
IDC RS 1100 RF Redundant Switching System
This product has reached end of life and is no longer available. Please contact us for a suitable replacement.
International Datacasting Profline RSW Redundancy Switch System is part of the IDC family of professional and reliable equipment and provides automatic and manual switching.
Fully Redundant
The 1:1 redundancy switch was developed for FM distribution. Features: Automatic and manual operation, MPX switch for FM applications, Audio switch for FM and satellite applications, Remote status and control WEB GUI and SNMP
INPUT SPECIFICATIONS
Interfaces 2
Compaarable Signals 0‐1.0 GHz pass‐through, 75 ohm characteristic
impedance
DVB‐ASI, SMPTE 259M, SMPTE 310M, 70 MHz IF,
140 MHz IF, UHF, VHF
Fault, Inputs and Outputs Isolated Voltage Sense, Terminal Block
OUTPUT SPECIFICATIONS
Interfaces 2
Compaarable Signals 0‐1.0 GHz pass‐through, 75 ohm characteristic
impedance
DVB‐ASI, SMPTE 259M, SMPTE 310M, 70 MHz IF,
140 MHz IF, UHF, VHF
COMPLIANCE
FCC, CE and UL
NETWORK SPECIFICATIONS
Interfaces Single 10/100 Base‐TX Ethernet port (RJ‐45)
Web browser GUI and SNMP MIB2 support
POWER REQUIREMENTS
Supply Voltage 85 to 265 VAC, 50 or 60 Hz autosensing
Power ConsumpƟon <50 Watts maximum
PHYSICAL PARAMETERS
Chassis 1RU rackmount (1/2 width)
Dimensions (H, W, D) 4.4 cm x 21.3 cm x 20.3 cm (1.72” x 8.4” x 8”)
Weight 2.13 kg (5 lbs.)
ENVIRONMENTAL CONDITIONS
Operating Temperature 0° to 50° C (32° to 122° F)
Humidity 5% ‐ 95% non‐condensing
Shock 3.5 g @ 10 ms duraƟon
VibraƟon 0.5 g @ 22 ‐ 100 Hz
Storage Temperature ‐20° to 70° C (‐4° to 158° F)
Support for major video broadcast formats