CPI SAT Model 123T Optrack Antenna Control System
L-Band frequency range is 950-2150 MHz, Passed DISA Tracking Stability Test
123T Antenna Control Tracking System
This product has reached end of life and is no longer available. Please contact Digisat for a suitable replacement for your application.
The CPI SAT (formerly GD Satcom Technologies & Prodelin) precision satellite tracking with most Mobile, Transportable, or Flyaway Antennas. The Antenna Control Unit (ACU) is the operator interface point for the system, featuring PC-104 based processing and operator-friendly function menus. The Power Drive Unit (PDU) provides all motor and antenna connections.
Internal Tracking Receiver Options
The Model 250 receiver is available with L-Band or 70 MHz input. L-Band frequency range is 950-2150 MHz and the tracking C/NO is 40 dB-Hz. Dual Model 250 receivers can be installed for redundancy. Antenna Pointing Accuracy Normally better than 0.07° RMS (0.05° optional) in winds of 30 mph gusting to 45 mph. Includes all drive train errors, but excludes structural errors between the
transducers and RF beam.
Tracking Accuracy - Optrack
Optrack provides high performance tracking of stable or inclined orbit satellites with an adaptive self-learning ephemeris modeling mode. The Control System accuracy (excluding non-repeatable mechanical errors) is normally better than 5% RMS (0.03 dB) of
the receive beamwidth in winds of 30 mph gusting to 45 mph, satellite inclination of up to 15°, and signal scintillation of up to 2 dB.
A variety of operational modes are available for quick target acquisition, pointing, and tracking.
Provides precision satellite tracking with most Mobile, Transportable, or Flyaway Antennas.
