CPI SAT HD-30 1.2M Tracking Antenna Pedestal Positioner

Type 4 Tracking antenna

Telecommunication Systems TCS Type-4 X/Y Tracking Antenna

HD-40 satellite tracking antenna pedestal

CPI SAT HD-40 1.8M / 2.4M Tracking Antenna Pedestal Positioner

SKU
CPI-HD30
CPI SAT HD-30 1.2M Tracking Antenna Pedestal Positioner is available to buy in increments of 1

Operating frequency: 1435-2400 MHz, Polarization: Simultaneous Right Hand and Left Hand Circular, Feed type: conically scanning

HD-30 1.2M Tracking Antenna Pedestal

The CPI HD-30 series harmonic drive pedestal is designed to support solid reflectors up to 1.2 meters in winds of 60 MPH. High output torque with low backlash is accomplished with the use of two stage reduction gearboxes and brushless DC motors. The rugged gearboxes use built-in angular ball bearing construction, which improves the ability to support external loads, increases moment rigidity, and increase maximum allowable moment, resulting in increased reliability and a reduction in maintenance. The use of roller bearings throughout the gearbox yields low backlash (less than 1 arcmin).

Designed with drive motors that have integrated servo amplifiers, the HD-30 can be controlled via RS-232 commands sent directly to the motors. In addition, the motors are equipped with digital encoders to provide accurate positioning information to the antenna control unit.

The HD series is ideally suited for transportable applications where weight and shipping volume are key factors. Features such as the sectional solid reflector, sectional FLAPS reflector, fiber-optic interface cables, tripod mount and small riser base, ensure that the system is lightweight and compact during transport.

The pedestal can be supplied with a tripod mount, with extendable legs, for transportable applications where no antenna-mounting pad is available at the test site or supplied with a small base for rigid mounting to mobile platforms.

Features

  • Portable, Compact, Lightweight
  • Rugged Construction
  • Supports Solid Reflectors up to 1.2 meters (4 ft.)
  • High Reliability and Accuracy
  • High Torque and Low Backlash
  • Fast Slew Rates
  • Brushless DC Motors
  • PC-based Automated Computer Control with P-Series ACU P500, P600 or P700
  • Acquisition-Aid Antenna
  • Compass and Inclinometer
  • Fiber-Optic Control
  • Transit Case


Whether you're tracking a Low Earth Orbit (LEO) satellite or providing remote sensing services, Digisat is ready to deliver a total turn-key high speed X/Y antenna system solution.  

Questions?  US Toll Free: +1-855-DIGISAT   |   International: +1-321-676-5250  |   Contact US

Ideally suited for transportable applications where weight and shipping volume are key factors