Comtech Radyne DMD20 16-QAM Universal Satellite Modem

Radyne Comtech DMD2050E MilSatcom Modem

Comtech Radyne DMD2050E MIL-STD-188-165A Military Satellite Modem

Radyne Comtech MM200

Comtech EF Data MM-200 High Speed Terrestrial Microwave Modem

SKU
DMD20
Comtech Radyne DMD20 16-QAM Universal Satellite Modem is available to buy in increments of 1

L-Band and 70/140 MHz IF Operation, 2.4 kbps to 20 Mbps, 1 kbps steps

DMD20 16-QAM Universal Satellite Modem

The Comtech Radyne DMD20 Satellite Modem breaks new ground in flexibility, operation and cost. With standards including IDR, IBS and DVB, and covering data rates up to 20 Mbps, this 1RU duplex modem covers virtually all your Satellite IP, Telecom, Video and Internet applications. Switch between spur-free 70/140 MHz operation and L-Band without any configuration changes. It's all in the same box!

Comtech Radyne DMD20 Modem RF Interface

Comtech DoubleTalk Carrier In Carrier

DMD20 now offers DoubleTalk® Carrier-in-Carrier® bandwidth compression. DoubleTalk Carrier-in-Carrier, based on patented “Adaptive Cancellation” technology, allows transmit and receive carriers of a duplex link to share the same transponder space. DoubleTalk Carrier-in-Carrier is complementary to all advances in
modem technology, including advanced FEC and modulation techniques. As these technologies approach theoretical limits of power and bandwidth efficiency, DoubleTalk Carrier-in-Carrier utilizing advanced signal processing techniques provides a new dimension in bandwidth and power efficiency.

The extensive list of software options allows for budgeting the modem for today's needs while covering tomorrow's plans. These options can be purchased and then activated in seconds via the front panel. Additional hardware options like Turbo Product Code (TPC), Low Density Parity Check Code (LDPC), interface expansion, high-stability and DC operation complete the modem's dynamic feature coverage.

Stock this modem at its minimum configuration (and cost) locally for immediate distribution. Then configure on-site, allowing huge savings in time and dollars with just-in-time feature installation.

Remote Control

The DMD20's impressive remote accessibility surpasses all others in the field. Remote control via the RLLP (Radyne Link Level Protocol), Ethernet 10Base-T (SNMP and Web browser) includes control of all the modem's features plus software maintenance. Additionally, the two-line backlit LCD can be supplemented with terminal software running on a PC or laptop. The modem now presents its entire monitor and control functions on the big screen.

Supported by an extensive line of redundancy switches, converters, encoders and decoders, the DMD20 can be built into any satellite requirement. The DMD20 is compatible with DMD15, DMD50, CM701, MD2401 and CDM-600.

Features

product features tab DoubleTalk Carrier-in-Carrier bandwidth compression
product features tab BPSK/QPSK/OQPSK/8PSK/8-QAM/16-QAM operation
product features tab 2.4 kbps to 20 Mbps, 1 bps steps
product features tab FEC - Viterbi, Reed-Solomon, Sequential, Trellis, TPC, LDPC
product features tab Configuration, monitor and control features fully user-programmable
product features tab Excellent spurious performance
product features tab Fully compliant with IESS-308/309/310/314/315
product features tab Optional DVB to EN301-210 and EN300-421
product features tab Industry-standard universal interface module
product features tab Fast acquisition
product features tab 50 to 90 MHz and 100 to 180 MHz IF, and 950 to 2050 MHz L-Band in 1 Hz steps
product features tab Standard features include: Reed-Solomon, asynchronous overhead, satellite control channel and automatic uplink power control

Hardware Options

DoubleTalk Carrier-in-Carrier

Turbo FEC

LDPC FEC

Sequential FEC

DC input power 48 VDC

High-stability reference

Software Options

Data rate upgrades

L-Band operation

IDR, IBS

8PSK/8-QAM

16-QAM

Drop and insert

DVB-S

Interface Options

Ethernet 10/100

HSSI interface

HSSI/Ethernet

HSSI/G703 interface

DVB ASI/SPI interface

G703/IDR/ESC

Specifications

DMD20 BER Performance Guaranteed (Typical) at BERs shown:

Modulation/FEC Code Rate 1 x 10-5 1 x 10-6 1 x 10-7 1 x 10-8 Data Rate Range

BPSK VIT 1/2 5.5 (5.1) 6.1 (5.7) 6.7 (6.2) 7.4 (6.8) 2.4 kbps - 5.0 Mbps

QPSK VIT 1/2 5.5 (5.1) 6.1 (5.7) 6.7 (6.2) 7.4 (6.8) 4.8 kbps - 10.0 Mbps

QPSK VIT 3/4 6.8 (6.3) 7.6 (7.0) 8.3 (7.7) 8.9 (8.4) 7.2 kbps - 15.0 Mbps

QPSK VIT 7/8 7.9 (7.2) 8.6 (7.9) 9.3 (8.6) 10.2 (9.4) 8.4 kbps - 17.5 Mbps

QPSK VIT RS 1/2 3.8 (3.4) 4.1 (3.6) 4.2 (3.8) 4.4 (4.0) 4.8 kbps - 8.88 Mbps

QPSK VIT RS 3/4 5.4 (4.7) 5.6 (4.9) 5.8 (5.1) 6.0 (5.3) 7.2 kbps - 13.33 Mbps

QPSK VIT RS 7/8 6.5 (6.0) 6.7 (6.4) 6.9 (6.7) 7.2 (7.1) 7.8 kbps - 15.55 Mbps

QPSK SEQ 1/2 5.6 (5.1) 5.9 (5.4) 6.3 (5.8) 6.7 (6.2) 4.8 kbps - 2.048 Mbps

QPSK SEQ 3/4 6.1 (5.6) 6.5 (6.1) 7.0 (6.5) 7.4 (6.9) 7.2 kbps - 2.048 Mbps

QPSK SEQ 7/8 6.9 (6.4) 7.4 (6.9) 7.9 (7.4) 8.4 (7.9) 8.4 kbps - 2.048 Mbps

QPSK TPC 1/2 2.7 (2.4) 2.9 (2.6) 3.1 (2.8) 3.3 (3.0) 4.8 kbps - 9.54 Mbps

QPSK TPC 3/4 3.6 (3.2) 3.8 (3.4) 4.1 (3.7) 4.4 (4.0) 7.2 kbps - 15.0 Mbps

QPSK TPC 7/8 4.2 (3.9) 4.3 (4.0) 4.4 (4.1) 4.5 (4.2) 8.4 kbps - 17.5 Mbps

8PSK TRE 2/3 7.8 (6.4) 8.7 (7.2) 9.5 (8.1) 10.2 (8.9) 9.6 kbps - 20.0 Mbps

8PSK TRE RS 2/3 5.8 (5.4) 6.2 (5.6) 6.5 (5.8) 6.7 (6.1) 8.9 kbps - 18.3 Mbps

8PSK TPC 3/4 6.0 (5.6) 6.2 (5.8) 6.4 (6.0) 6.8 (6.3) 10.8 kbps - 20.0 Mbps

8PSK TPC 7/8 6.9 (6.5) 7.0 (6.6) 7.1 (6.7) 7.2 (6.8) 12.6 kbps - 20.0 Mbps

16-QAM VIT 3/4 10.7 (9.9) 11.5 (10.7) 12.4 (11.6) 13.3 (12.5) 14.4 kbps - 20.0 Mbps

16-QAM VIT 7/8 11.9 (11.1) 12.7 (11.9) 13.5 (12.7) 14.3 (13.5) 16.8 kbps - 20.0 Mbps

16-QAM VIT RS 3/4 8.9 (8.3) 9.1 (8.6) 9.3 (8.8) 9.5 (9.1) 13.3 kbps - 20.0 Mbps

16-QAM VIT RS 7/8 10.3 (9.9) 10.5 (10.2) 10.8 (10.4) 11.0 (10.7) 15.5 kbps - 20.0 Mbps

16-QAM TPC 3/4 7.0 (6.7) 7.4 (7.1) 7.8 (7.5) 8.2 (7.9) 14.4 kbps - 20.0 Mbps

16-QAM TPC 7/8 8.0 (7.6) 8.1 (7.7) 8.2 (7.8) 8.3 (7.9) 16.84 kbps - 20.0 Mbps

Modulator

Modulation BPSK, QPSK, and OQPSK (8PSK, 8-QAM & 16-QAM optional)

IF Tuning Range 50 to 90 and 100 to180 MHz in 1 Hz steps

L-Band Tuning Range 950 to 2050 MHz in 1 Hz steps

Impedance IF: 75 Ohm (50 Ohm optional)

L-Band: 50 Ohm

Connector BNC: 75 Ohm

SMA: 50 Ohm, L-Band

Return Loss IF: 20 dB minimum

L-Band: 14 dB minimum

Output Power 0 to -25 dBm

Output Stability IF: ±0.5 dB Over frequency and temperature

L-Band: ±1.0 dB Over frequency and temperature

Output Spectrum Meets IESS-308/309/310/DVB-S

Power spectral mask

Spurious

-55 dBc In-band (50 to 90 MHz, 100 to 180 MHz,

950 to 2050 MHz)

-45 dBc Out-of-band

On/Off Power Ratio >60 dB

Scrambler CCITT V.35 or IBS (Others optional)

FEC

Viterbi, K=7 at 1/2, 3/4 and 7/8

Sequential 1/2, 3/4 and 7/8 (optional)

Trellis 2/3

Turbo Product Code (optional)

BPSK: 21/44

QPSK/OQPSK: 1/2 (21/44), 3/4, 7/8

8PSK/8-QAM, 16-QAM: 3/4, 7/8

Legacy Turbo Rates: 0.495, 0.793 (optional)

LDPC (optional)

BPSK: 1/2

QPSK/OQPSK: 1/2, 2/3, 3/4

8PSK/8-QAM: 2/3, 3/4

16-QAM: 3/4

Outer Encoder Options Reed-Solomon Intelsat (DVB-S optional)

Custom (N, K) Reed-Solomon (optional)

Data Clock Source Internal, external, RX recovered

Internal Stability 1 x 10-6 Typical (optional to 5 x 10-8)

Demodulator

Demodulation BPSK, QPSK, and OQPSK (8PSK, 8-QAM & 16-QAM optional)

IF Tuning Range 50 to 90 and 100 to 180 MHz in 1 Hz steps

L-Band Tuning Range 950 to 2050 MHz in 1 Hz steps

Impedance IF: 75 Ohm (50 Ohm optional)

L-Band: 50 Ohm

Connector BNC: 75 Ohm

SMA: 50 Ohm (L-Band)

Return Loss IF: 20 dB minimum

L-Band: 14 dB minimum

Spectrum Intelsat IESS-308/309/310/DVB-S compliant

Input Level 10 x log (symbol rate) – 100, ±12 dB

Total Input Power -10 dBm or +40 dBc (the lesser) @ 256 kbps

FEC

Viterbi, K=7 at 1/2, 3/4 and 7/8,

Sequential 1/2, 3/4 and 7/8 (optional)

Trellis 2/3

Turbo Product Code (optional)

BPSK: 21/44

QPSK/OQPSK: 1/2 (21/44), 3/4, 7/8

8PSK/8-QAM, 16-QAM: 3/4, 7/8

Legacy Turbo Rates: 0.495, 0.793 (optional)

LDPC (optional)

BPSK: 1/2

Q-PSK/OQPSK: 1/2, 2/3, 3/4

8PSK/8-QAM: 2/3, 3/4

16-QAM: 3/4

Decoder Options Reed-Solomon Intelsat (DVB-S_optional)

Custom (N, K) Reed-Solomon (optional)

Descrambler CCITT V.35 or IBS (Others optional)

Acquisition Range Programmable ±1 kHz to ± 255 kHz

Sweep Delay Value 100 msec to 6000 seconds in 100 msec steps

DMD20 specifications

DMD20 specifications page 2

DMD20 specifications page 3

Typical Users

Cellular Backhaul
Government & Military

Common Applications

Cellular Backhaul
G.703 Trunking
IP Trunking