Comtech L-Band LCS-4 Satellite Modem Redundancy Combiner Switch System

CPI SAT Ka-Band Septum OMT 113527-17 (21.40 - 25.30 GHz) CP

CPI SAT Ka-Band Septum OMT 113527-17 (21.40 - 25.30 GHz) CP

quintech rps 2460 lnb power supply

Quintech RPS 2460 Redundant DC Power Supply System

SKU
LCS-4
Comtech L-Band LCS-4 Satellite Modem Redundancy Combiner Switch System is available to buy in increments of 1

L-Band switching for modems, modulators & demodulators

LCS-4 L-Band Combiner / Splitter

The Comtech EF Data LCS-4 is a highly technologically sophisticated satellite modem combiner that delivers combining and/or splitting of L-Band RF frequencies.  The LCS-4 also functions as a redundancy controller for RF switches located directly in the antenna hub.

The extremely vast features include

4-way L-Band combining for modulators

4-way L-Band splitting for demodulators

L-Band Interface to ODU/BUC and LNB

1:1 controller for BUC redundancy

1:1 controller for LNB redundancy

Hot swappable power supplies replaceable from the front

Options for redundant BUC power supplies

24VDCat 100 W

48VDCat 180 W

Integrated BUC Power supply supports up to 10 W C-Band and 8 W Ku-Band

High stability internal 0.02 ppm 10 MHz reference 

Comtech EF Data LCS-4 Specifications

Specifications

Operating Frequency 950 to 1950 MHz (L-Band)

TX IF Connector Type N, Female, 4 combined inputs, 2 switched outputs

TX Return Loss 10 dB minimum, 50 ohm

TX Gain -10 dB maximum loss, Combiner Input to unit output

TX Input Level 0 dBm composite operating, +10 dBm no damage

RX IF Connector Type F, Female, 2 switched inputs and 4 split outputs

RX Return Loss 10 dB minimum, 75  RX Gain 0  3 dB

LNB Input to Splitter Output RX Input Level 0 dBm composite operating, +10 dBm no damage

Frequency Reference Internal or external

Reference Stability 10 MHz, 0.02 ppm (Internal)

Internal/External Reference Phase Noise Frequency Offset dBc/Hz 1 Hz -80 10 Hz -110 100 Hz -135 1 kHz -140 10 kHz -150 100 kHz -150

Reference Level ODU/BUC: 0  3 dBm

LNB: -3  3 dBm

External Reference Input 10 MHz, -10 to +15 dBm, 1 BNC Female connector

Reference Output 0 dBm  3 dB at 4 BNC female connectors

Reference Return Loss Input/Output: 15 dB minimum, 50 

Power Supply 1 or 2 assemblies hot swap from front panel. Includes unit power supply or unit power + ODU/BUC supply ODU/BUC Supply 24 VDC 100 W, AC Input (see prime power) 48 VDC 180 W, AC Input

Switchover Time Within 1.5 seconds of fault detection

Satellite Modem switching and redundancy for VSAT and Earth Station antennas