Adtec Digital EN81 MPEG-4 H.264 SD/HD DSNG Video Encoder DVB-S2 Modulator System
Supports High Definition and DVB-S2 Modulation all in one unit
EN-81 Video Encoder
This product has reached end of life and is no longer available. It has been replaced by the EN210.
The industry leading and highly advanced Adtec EN81 is a multi-CODEC low delay MPEG 2 and MPEG 4 AVC/H.264 high definition encoder. Since its introduction to the broadcasting market, the 81 series has set the standard for multipurpose, multi-CODEC compression platforms. It is deployed in very large numbers globally providing high performance, reliability and value for sensitive broadcast and services contribution that do not get a second chance. Its proven interoperability, usability, and units in service are simply unmatched.
Reliable Encoding
As a global benchmark for DSNG the Adtec EN81 delivers Tier One Contribution and trunking for Teleports, OB Vans and fiber operators around the world. This extremely lightweight, 10 pound or 4.5 Kilo unit offers amazing features and specifications in its 1RU chassis
Key Features
Redundant AC power supplies
Enhanced control and monitoring via its front-panel
Browser and SNMP Monitor and Control
EN81 video support includes SD, 2D-HD and 3D AVC 422 with MPEG 2
Sixteen channels of phase aligned audio
Robust VBI support
Reliability and easy of use all for an extraordinary value.
Audio Coding
In addition to encoding phase aligned audio, the EN81 series pass-through support includes PCM, DolbyE (16 and 20 Bit) and Dolby AC3 (2.0 and 5.1).
Modulation
Encoding support and concurrently transports services via ASI, IP and DVBS/S2. The EN81 integrated Newtec DVBS/S2 modulator is available in IF or L-band with modulation modes ranging from QPSK up to 32APSK based on software licenses.
General Specifications
Power 1 |
AC Power, Standard 3 pin computer power plug (Auto range 70-240 VAC Input) |
Power 2 |
Redundant AC Power, Standard 3 pin compute power plug (Auto range 70-240 VAC Input) |
GigE Port |
Transport Stream via UDP/RTP |
Link LED |
Indicates network connectivity present |
Busy LED |
If flashing, indicates traffic present |
Com 2 |
RS232 Control |
Com 1 |
RS232 Terminal |
Eth 0 |
Ethernet 10/100 management |
USB 2.0 |
Not currently supported |
DNC ParPort |
9-pin parallel I/O interface for general-purpose interfacing to control systems |
RS422 Control |
9-pin RS422 port, used for master (deck) or slave (non-linear editor export) |
ASI Out 1-3 |
3 mirrored 188 Byte Transport Out, up to 100 Mbps |
CVBS In |
75 Ohm composite video input, used for SD resolutions only |
SDI In |
75 Ohm terminated Input, Video & Audio (SMPTE-259M for SD and SMPTE-292M for HD) BNC |
GPIO |
Parallel IO interface for Start, Stop, Status, and general-purpose interfacing to control systems |
AES 1-4 |
Compressed or uncompressed terminating (75 Ohm) digital audio inputs. |
Analog Audio In |
Analog Balanced (600 Ohm) audio input. Stereo pairs (ch1 and ch2) |
AES Out |
Do not use |
Integrated L-Band Modulator |
|
Main |
RF output, 50 Ohm BNC, frequency range 950 MHz to 1.750 GHz, Power Level -50 to -7 dBm |
Monitor |
RF output, 50 Ohm BNC, fixed power level at - 45 dBm |
Integrated IF-Band Modulator |
|
Main |
RF output (IF), 50 Ohm BNC-connector, frequency range 50 MHz to 180 MHz, Power Level -30 to +5 dBm |
Monitor |
RF output (1080MHz), 50 Ohm BNCConnector, fixed power level at -45 dBm, fixed frequency at 1.08 GHz |
External 10 MHz |
BNC 50 Ohm connector for external 10MHz reference input (use is not required for designed functionality) |
Satellite News Gathering, DVB-S2 Signal Modulation, HD & SD Video Broadcasting