Quintech Electronics LS4 2150A 1FVA000 Quad 4-Way Active L-Band Splitter (950-2150 MHz)

quintech ls4 2150a

Quintech Electronics LS2 2150A 2-Way Active L-Band Splitter (950-2150 MHz)

quintech ls12 2150a

Quintech Electronics LS12 2150A 12-Way Active L-Band Splitter (950-2150 MHz)

$379.00
SKU
LS4-2150A/4X16A
Quintech Electronics LS4 2150A 1FVA000 Quad 4-Way Active L-Band Splitter (950-2150 MHz) is available to buy in increments of 1

4x16 way Splitter, 950 to 2150 MHz

LS4 2150A/4X16A  Quad 4-Way Active L-Band Splitter (950-2150 MHz)

The LS042150A1FVA000 is a commercial quality 4-way active splitter that meets strict level and match specifications achieved through the use of Quintech’s proprietary microstrip and SMT technology. It operates over the 950-2150 MHz frequency range and permits signal splitting with zero loss, eliminating the need for external distribution amplifiers.  

Dual Power

Internal circuitry has been incorporated into the LS042150A2FSA000 to allow parallel connection of 2 DC power sources for redundancy. The front panel includes 3 LEDs which indicate the current power status of the unit, along with a 2-amp fuse for each power input. The green LED labeled “POWER” will light if either power source is functional. If power source #1 fails, the red LED labeled P-1 will light. If power source #2 fails, the red LED labeled P-2 will light. If both power sources are operational, neither P-1 nor P-2 will light (see LNB power specification below).

LS4 2150A 4x16A Interface


Signal Loss

The LS 2150A Series commercial quality active (zero loss) L-band splitters meet strict level, match, and loss specifications achieved through the use of Quintech's proprietary microstrip and SMT technology. They operate over the Satellite L-band (950-2150 MHz) frequency range and enable the splitting of L-band RF signals with repeatable performance over the entire frequency range and across all I/O ports

System Diagram

Active Splitter Features

Convenient, centralized rack mount designs improve cable management.

Microstrip design provides better performance and reliability.

Larger configurations eliminate cascaded combiners for better performance.

Active (zero loss) combiners allow for ease in RF budget design.

Custom configurations for optimization of rack space and increased flexibility.

Greatly improves cable management and aesthetics by allowing for easy access to cable routing and easing identification of cabling.

Reduces cable connector failures by eliminating the need for frequent manual connects/disconnects. 

Frequency:Impedance:P1dB: OIP3:

18V PRESENT ON AT ALL TIMES  950-2150 MHz 75 Ω +3 dBm +17.5 dBm DC Voltage PRESENT ON INPUTS AT ALL TIMES

Insertion Loss:

 0 + 2 dB

Frequency Response:

 + 1 dB

Isolation:

 18 dB

Input Return Loss:

 14 dB

Output Return Loss:

 15 dB

Noise Figure:

 9 dB

RF Connectors:

Type F, 75 Ω

Power Requirements:

 18-24 V , @ 2.0A via 2-pin quick connect barrier strip

LNB Power:

 18-24 V (1.7A max. available for LNB power)

Power Consumption:

10 W (plus customer LNB power load)

Mechanical:

1 RU (1.75" H x 19" W x 6.5" D)

Weight:

10.0 lbs. gross (boxed), 3.2 lbs. net

Certifications:

CE

950 to 2150 MHz L-Band RF signal distribution, Satcom & VSAT Systems