International Datacasting MUX-5008 Transport Stream Multiplexer
PID Remapping (Automatic or Manual), PCR regeneration, Front panel control with alphanumeric full-travel buttons, 1RU compact rugged rackmount chassis
MUX-5008 Transport Stream Multiplexer
International Datacasting MUX-5008 is an extremely feature rich transport stream multiplexer that supports up to 8 ASI inputs. The output may be configured as two separate multiplex groups to simplify feeding different services.
Highly Configurable
The MUX-5008 can multiplex from 2 to 8 input ports, with support for stream grooming and rebranding. A single unit may support two entirely different multiplex-es. This is useful when feeding the primary multiplex to a local DTV transmitter, with a separate multiplex for local cable operators.
Easy to use
There is a complete set of backlit alphanumeric full-travel buttons on the front panel for easy configuration, even in the dark. The large LCD display is illuminated, yet provides high contrast for visibility in direct sunlight. Control may be via the simple front panel interface or via the integrated web browser controlled software interface.
Reliable and affordable
The IDC MUX-5008 multiplexer provides an industry-leading set of features in a highly compact, highly affordable package. The unit is designed for demanding 24 / 7 environments for years of reliable operation.
STANDARD FEATURES |
|
Transport Inputs |
Up to eight (8) ASI inputs supported ISO 13818 DVB and ATSC Compliant
|
Transport Stream Processing |
Graphical representation of each received transport stream PID filtering and remapping Stream rebranding PSI table rebuilding PSI table editing Large input buffer for error-free handling bursty input streams Automatic PCR restamping to minimize PCR jitter Up to 64 PIDs per output multiplex Provision for EPG insertion
|
ASI Output |
Two (2) ASI outputs ATSC or DVB compliant output Bit rate to 216 Mbps 2 independent transport stream multiplexes
|
IP Outputs |
Two (2) IP transport stream outputs over the Gigabit Ethernet port Each output stream is a mirror of the asso-ciated ASI output TS over UDP Multicast supported
|
STATUS AND CONTROL INTERFACES |
|
Front Panel Control |
Backlit, Full-Travel Pushbuttons Backlit LCD Display
|
Remote Control |
Web Based Control management RJ 45 100Base-T
|
POWER REQUIREMENTS |
|
Supply Voltage |
90 to 240 VAC, 50 or 60 Hz
|
Power Consumption |
70 Watts maximum
|
PHYSICAL PARAMETERS |
|
Chassis |
1RU rackmount |
Dimensions (H, W, D) |
4.5 cm x 43.2 cm x 39.4 cm (1.77” x 17” x 15.5”) |
Weight |
5.5 kg (12 lbs) |
ENVIRONMENTAL CONDITIONS |
|
Operating Temperature |
0° to 45° C (32° to 113° F) |
Fully Compliant with ISO 13818 and EN300 468