Terrasat Low Energy Consumption IBUC 2E C-Band Intelligent Block Upconverter (5.85 - 6.725 GHz) 5W - 20W
Freq. range 5.85 to 6.725 GHz in five frequency bands, IF 950 to 1450 Mhz, Interface CPR-137G or Type-N (female), Spurious In Band -70 dBc
IBUC 2E C-Band Low Energy Consumption Block Upconverters (5W - 20W)
The Terrasat Communications IBUC 2E C-Band provides low energy consumption for use with modems equipped with limited capacity BUC power supplies. DC power is supplied via IFL coax and extremely low phase noise better than IESS308/309 requirements.
Embedded Web pages pro-vide management for small networks using any Web browser. AGC or ALC circuits hold gain or output level constant. 30 dB User-adjustable gain in 0.1 dB steps preserves mo-dem dynamic range.
|
Power Consumption |
|
|
5 Watt |
50W |
|
10 Watt |
65W |
|
15 Watt |
100W |
|
20 Watt |
120W |
Advanced user interfaces:
- TCP/IP HTTP with embedded Web pages
- SNMP
- TELNET through TCP/IP
- FSK through TX IFL cable
- RS232/485 serial port
- Hand‐held terminal
IBUC 2E comes with a complete set of diagnostic tools including:
10 MHz input detector Input voltage and current monitoring Transmit L‐band input level detector Transmit RF output level detector User configurable thresholds and alarms
Unique to the IBUC 2E C-Band Low Energy Consumption VSAT BUCs are internal AGC and ALC functions that satisfy demanding applications with stringent specifications.
|
Frequency range |
RF |
IF |
|
|
Band 1 Std C |
5850 to 6425 MHz |
950 to 1525 MHz |
|
|
Band 2 Palapa/STI |
6425 to 6725 MHz |
975 to 1275 MHz |
|
|
Band 3 INSAT |
6725 to 7025 MHz |
1150 to 1450 MHz |
|
|
Band 4 Ext. C |
5850 to 6650 MHz |
950 to 1750 MHz |
|
|
Band 5 Full C |
5850 to 6725 MHz |
975 to 1850 MHz |
|
|
|
|
||
|
Input |
|
||
|
VSWR / Impedance |
1.5:1 max / 50 Ohm |
||
|
Input Connector |
Type N female (50 Ohm) |
||
|
Input Connector options |
Type F (75 Ohm), TNC (50 Ohm) |
||
|
Input power detector |
-55 to –20 dBm |
||
|
|
|
|
|
|
Gain |
|
|
|
|
Small Signal Gain (L-band to RF) with attenuator set to 0 dB |
|||
|
5 W |
68 dB min |
|
|
|
10 W |
71 dB min |
|
|
|
15 W |
73 dB min |
|
|
|
20 W |
74 dB min |
|
|
|
|
|
|
|
|
Attenuator range |
30 dB variable in 0.1 dB steps |
||
|
Gain flatness |
Bands 1/2/3 |
Bands 4/5 |
|
|
Full band |
3 dB p-p max |
4 dB p-p max |
|
|
36 MHz |
1 dB p-p max |
1.5 dB p-p max |
|
|
1 MHz |
0.25 dB p-p |
0.25 dB p-p |
|
|
Gain variation over temperature |
|
||
|
Open loop |
3 dB p-p max |
4 dB p-p max |
|
|
With AGC |
1 dB p-p max |
1 dB p-p max |
|
|
|
|
|
|
|
RF Output |
|
|
|
|
Interface |
CPR-137G or N(f) |
||
|
VSWR |
1.5:1 max |
|
|
|
Rated output power |
P1dB |
|
|
|
5 W |
+37 dBm min |
|
|
|
10 W |
+40 dBm min |
|
|
|
15 W |
+41.8 dBm min |
|
|
|
20 W |
+43 dBm min |
|
|
|
|
|
|
|
|
IMD3 (2 carriers, 3 dB TOBO) -27 dBc max |
|||
|
Level stability with ALC +0.5 dB |
|||
|
Output power detector range Rated power to –20 dB |
|||
|
Power reading accuracy + 1.0 dB max |
|||
|
Spurious In Band |
-70 dBc |
|
|
|
Out of Band |
Complies with EN 301 443 and MIL-STD 188-164B |
||
|
Harmonics |
-50 dBc max |
||
|
Output Noise Power Density |
|||
|
TX |
< -83 dBm/Hz |
|
|
|
RX |
< -145 dBm/Hz |
|
|
Flyaway VSATs, fixed earth stations, Internet systems and maritime communications terminals
