Acorde Technologies ACTX-Ka Low Power Linearized 5W Ka-Band BUC

Acorde 5 Watt

Acorde Technologies ACTX-Ka Low Power Series 5W Ka-Band BUC

Acorde 10W / 20W

Acorde Technologies ACTX-Ka Medium Power Series 10W / 20W Ka Block Up-Converter

SKU
ACTX-Ka5W-LIN
Acorde Technologies ACTX-Ka Low Power Linearized 5W Ka-Band BUC is available to buy in increments of 1

Output frequency 29.5 to 30.0 GHz, 30.0 to 31.0 GHz, Input frequency 950 to 1450 MHz or 950 to 1950 MHz

ACTX-Ka-LP Linearized Block Upconverter

Acorde Technologies Corp 5W Ka-Band BUC (Block Upconverter) is the ideal entry power level Ka-Band BUC solution that operates in ka band frequencies from 27.5 to 31.0 Ghz. This compact VSAT BUC mounts directly to the antenna feed system which alleviates RF loss and maximizes gain.

ACTX-Ka series are designed for use in all Ka-band satellite communication systems.

Fully Integrated

ACTX-Ka BUCs are integrated with power supply, phase locked oscillator, power amplifier and frequency converter.  ACTX-Ka series BUCs have been tested between -20ºC and +55ºC, providing very good gain stability with temperature.

Thermal Protection

They also include a temperature alarm and power supply shutdown to protect the amplifier from permanent damages in high temperature conditions. Standard communication is via serial port (RS232/RS485), but TCP/IP and SNMP could be selected as options.

TRANSMITTER SPECIFICATIONS

Input frequency ...................................................................................................... 950 to 1950 MHz (See options)

Input impedance ................................................................................................... 50 Ω

Input L-band VSWR ................................................................................................ < 1.8:1

Output frequency .................................................................................................. 29.5 to 31.0 GHz (See options)

Output impedance ............................................................................................... 50 Ω

Output Ka-band VSWR ......................................................................................... < 2.0:1

Spectrum inversion ............................................................................................... None

 

Transmitter Characteristics @ 25ºC P1dB typ. Gain Power Consumption Size (LxWxH) Weight

ACTX-Ka5W-Ex-V3 37.0 dBm 65 dB min 60 W @ P1dB 195 x 120 x 60 mm 2.0 kg

 

Maximum input level without damage .............................................................. +10 dBm

Gain flatness over the whole bandwidth........................................................... ± 1.5 dB BW=500 MHz

 ± 2 dB BW=1 GHz

Gain flatness over 40 MHz..................................................................................... ± 0.5 dB

Gain stability (24 Hours) ........................................................................................ < 0.5 dB

Gain variation over temperature ........................................................................ ± 1.5 dB over the whole range (-20 to +55ºC)

 ± 2 dB over the whole range (-40 to +55ºC)

Attenuation adjustment range ............................................................................ 20 dB, with 0.5 dB steps

Mute ......................................................................................................................... > 70 dB

Noise figure .............................................................................................................. ≤ 15 dB (at maximum gain)

Output noise ............................................................................................................ < -100 dBm/Hz (Tx Band 29.5 to 31.0 GHz)

 < -140 dBm/Hz (Rx Band 19.2 to 21.2 GHz)

Spurious ................................................................................................................... < -60 dBc at Pout = P1dB

Spectral regrowth @ P1dB – 2 dB ......................................................................... < -30 dBc QPSK modulation at 1.0 x rate offset from carrier

LOCAL OSCILLATOR

Output phase noise (IESS-308/309 – 5 dB):

 100 Hz ................................................................................................................. -65 dBc/Hz

 1 kHz .................................................................................................................... -75 dBc/Hz

 10 kHz .................................................................................................................. -85 dBc/Hz

 100 kHz ................................................................................................................ -95 dBc/Hz

Reference frequency .......................................................................................... 10 MHz

Reference mode ................................................................................................... External (internal as option)

Reference input level ............................................................................................ 0 dBm ± 3 dB (multiplexed on L-band input)

LO frequency stability ........................................................................................... same as external reference

Minimum external reference to compliant typical phase noise (IESS-308/309 – 5 dB):

 100 Hz ................................................................................................................. -135 dBc/Hz

 1 kHz .................................................................................................................... -145 dBc/Hz

 10 kHz .................................................................................................................. -155 dBc/Hz

POWER SUPPLY

DC input vol tage (multiplexed on L-band input).................................................... 48VDC (24 VDC as option)

ENVIRONMENTAL SPECIFICATIONS

Storage temperature ........................................................................................... -40 to +80ºC

Operating temperature ....................................................................................... -20 to +55ºC (-40 to +55ºC as option)

Relative humidity ................................................................................................... up to 95%

Operating altitude ................................................................................................ up to 3500 m

MECHANICAL SPECIFICATIONS

 Interfaces:

 TX input (L-Band+DC+Ext. Ref.):...................................................................... Type N(F) 50 Ω

 TX output (Ka-Band): ....................................................................................... WR28 grooved

 Monitoring & Control: ..................................................................................... MS3112E12-14S

Cooling system ....................................................................................................... None

Finish ......................................................................................................................... White

OPTIONS

Frequency band: L-band input LO frequency Model Number

29.5 to 30.0 GHz 950 to 1450 MHz 28.550 GHz ACTX-Ka5W-E2-V3-xxx

30.0 to 31.0 GHz 950 to 1950 MHz 29.050 GHz ACTX-Ka5W-E6-V3-xxx

30.0 to 31.0 GHz 1000 to 2000 MHz 29.000 GHz ACTX-Ka5W-E66-V3-xxx

 

LP1: .......................................................................................................................... 24 VDC power supply

LP2: .......................................................................................................................... Internal reference (with automatic external selection on presence)

LP3: .......................................................................................................................... Operating temperature (-40 to +55ºC)

LP4: .......................................................................................................................... Ethernet interface (TCP/IP)

LP5: .......................................................................................................................... SNMP Agent

LP6: .......................................................................................................................... NATO green IR finish

LP7: .......................................................................................................................... Desert sand finish (RAL 1019)

Designed for linear operation in all low RF power Ka-band satellite communication systems.